Tag: ios

Hi, guys

I want to show two renderableSeries on one chart view. These series have common x-axis (SCICategoryDateTimeAxis) and separate y-axes(SCINumericAxis). Only one of y-axis is visible at chart view. Also the data series of visible renderable series updated by scrolling to left or to right. So for displaying on one view i’m using:

[y1Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.3) Max:SCIGeneric(0.07)]];
[y2Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.0) Max:SCIGeneric(5)]];

So it’s look good at start (Correct_zooming.png). But after some scrolling it decrease axis extents of invisible y-axis (decrease.png).
Or even breaks down (broken.png)

For test i’m using SCIFastOhlcRenderableSeries and SCIHorizontallyStackedColumnsCollection readerable series.
Data series for SCIHorizontallyStackedColumnsCollection is initializated like:

    [volumeSerie1 updateAt:index Y:SCIGeneric(100000 / [multiplier doubleValue])];
    [volumeSerie2 updateAt:index Y:SCIGeneric(500000 / [multiplier doubleValue])];

So can you look at it?
Or what way i should implement this behavior?

Best regards,
Sushynski Andrei

Hi,

I’ve encountered an issue with the candlestick graph I’ve drawn that consists of a set of random X date time values – this causes the candlesticks have varying distances from one another.

Rendering the data from an initial set seems to be fine but as I run a NSTimer to add on more points, the body of the new candlesticks seem to be 0. (Note, the date time values are still random but have been made to be set after the last placed point)

In fact, the initial data points that I added see to be rendered ‘body-less’ if it’s within the same visible range as the newly added points. And if I pan along the newly added points, the bodies of some data points will appear at random visible ranges.

Is this a normal behaviour or should I take anything else into consideration?

Here are a couple of my configurations which I think may have affected anything:
1. My XAxis has set its visible range limit mode to ClipMode_Min
2. Candlestick series style data body width is set to be default.
3. I have a the following modifiers set up.

self.xDragModifier = [SCIXAxisDragModifier new];
self.xDragModifier.axisId = @"xAxis";
self.xDragModifier.dragMode = SCIAxisDragMode_Pan;
self.xDragModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
[self.xDragModifier setModifierName:@"XAxis DragModifier"];

self.pinchZoomModifier = [[SCIPinchZoomModifier alloc] init];
[self.pinchZoomModifier setModifierName:@"PinchZoom Modifier"];
self.pinchZoomModifier.xyDirection = SCIXYDirection_XDirection;

self.zoomPanModifier = [SCIZoomPanModifier new];
self.zoomPanModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
self.zoomPanModifier.xyDirection = SCIXYDirection_XDirection;
[self.zoomPanModifier setModifierName:@"ZoomPan Modifier"];

SCIModifierGroup * gm = [[SCIModifierGroup alloc] initWithChildModifiers:@[self.xDragModifier, self.pinchZoomModifier, self.zoomPanModifier]];
self.chartSurface.chartModifier = gm;

The points are drawing just fine, but the body of the candlestick is not appearing as expected.

Thanks in advance.

Hi

I am developing a Xamarin iOS application and I’m using a SCIPieChartSurface. I can create the chart and set its values, but is is not possible to auto-update the donut with new data.
I am trying to update the value by doing:

myDonut.MyPieSegment.Value = newValue;

But nothing happends…

I heard it was a bug in the API for Android a month ago, is this similar? Or am I doing something wrong?
Thanks in advance!

Best regards
Jonas

Hi, guys

What is the minimum required sdk version for SciChart v.2?

Such as i have some trouble with IOS 9. See attachment.

Same behavior at real devices.

Can you look at this?

Best regards,
Sushynski Andrei

Hi, guys

My x axis is SCICategoryDateTimeAxis class type. And it’s limited by VisiableRangeLimit like:

[xAxis setVisibleRangeLimit:[[SCIDoubleRange alloc] initWithMin:SCIGeneric(firstItem – (lastItem – priorItem))
Max:SCIGeneric(lastItem + (lastItem – priorItem))]];

Also for scrolling my content inside chart:

SCIZoomPanModifier * zpm = [[SCIZoomPanModifier alloc] init];
[zpm setModifierName:@"PanZoom Modifier"];
[zpm setClipModeX:SCIZoomPanClipMode_ClipAtExtents];

Like a description SCIZoomPanClipMode_ClipAtExtents says:
“forces the panning operation to stop suddenly at the extents of the data” – but it’s not working constantly.
Sometimes it’s allow to scroll outside the range. Like on the attached image.

So my question is how to limit scrolling by min and max value?

Best regards,
Sushynski Andrei

Is the styleFor function of SCIPaletteProvider that was in Version 2.0 not implemented in Version 4.8?
Also, are there any plans to implement it?

I am upgrading from SciCharts 2.0.1 to SciCharts 4.3.
When the color was set using SCI Palatt Provider in Version 2.0, the memory used was 200M, but in Version 4.3, the memory used may consume as much as 1G.
I tried to devise it by setting the Sampleing Mode, but it is not very effective.

SCI Charts is used to display the spectrum data of audio data while playing the sound.

When search this forum, I found that we can achieve it by adding point marker. But I am getting this error when trying to add point marker :
‘Operation: setPointMarker: is not avaliable on type: SCIHorizontallyStackedColumnsCollection’

let me know this feature(round top corners of bars) is availble or not ! Or is there any way to do this ?

On device, there is an unwanted border line on the SCIChartSurface. Please refer to the screenshot.

I tried removing this by setting the border width and setting it’s colour as white as below
self.surface.view.layer.borderColor = [[UIColor whiteColor]CGColor];
self.surface.view.layer.borderWidth = 2.0f;
However, this does not set the border of the SCIChartSurface.

How do I remove this unwanted border line?

I’m getting the following crash:

2020-02-14 16:45:43.902812-0500 CommonStock Development[2425:710225] -[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x282ffe080
2020-02-14 16:45:43.904098-0500 CommonStock Development[2425:710225] *** Terminating app due to uncaught exception ‘NSInvalidArgumentException’, reason: ‘-[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x282ffe080’

whenever I try to scrub my chart, I must also note that in order for the legend to show, I have to tap really hard on the surface.

This is my code:

func set(data set: SimpleChartDataSet, alternate: SimpleChartDataSet) {

    let lineDataSeries = SCIXyDataSeries(xType: .double, yType: .double)
    let dashedDataSeries = SCIXyDataSeries(xType: .double, yType: .double)

    let group = DispatchGroup()
    group.enter()

    DispatchQueue.global(qos: .userInteractive).async {
        for (index, i) in set.enumerated() {
            lineDataSeries.append(x: Double(index), y: Double(i))
        }

        for (index, i) in alternate.enumerated() {
            dashedDataSeries.append(x: Double(index), y: Double(i))
        }

        group.leave()
    }

    group.notify(queue: .main) {

        let lineSeries = SCIFastMountainRenderableSeries()
        lineSeries.zeroLineY = set.min() ?? 0.0
        lineSeries.dataSeries = lineDataSeries
        lineSeries.strokeStyle = SCISolidPenStyle(color: UIColor.green, thickness: 2.0)
        lineSeries.areaStyle =  SCILinearGradientBrushStyle(start: CGPoint(x: 0, y: 1), end: CGPoint(x: 0, y: 0), start: UIColor.green, end: UIColor.clear)

        let dashedSeries = SCIFastLineRenderableSeries()
        dashedSeries.zeroLineY = set.min() ?? 0.0
        dashedSeries.dataSeries = dashedDataSeries
        dashedSeries.strokeStyle = SCISolidPenStyle(color: UIColor.white, thickness: 2.0, strokeDashArray: [2.0,2.0,2.0,2.0])

        SCIUpdateSuspender.usingWith(self.surface) {

            self.surface.xAxes.clear()
            self.surface.yAxes.clear()
            self.surface.renderableSeries.clear()

            let xAxis = SCINumericAxis()
            xAxis.drawLabels = false
            xAxis.drawMajorBands = false
            xAxis.drawMajorGridLines = false
            xAxis.drawMinorGridLines = false
            xAxis.drawMinorTicks = false
            xAxis.drawMajorTicks = false
            xAxis.drawLabels = false

            let yAxis = SCINumericAxis()
            yAxis.drawLabels = false
            yAxis.drawMajorBands = false
            yAxis.drawMajorGridLines = false
            yAxis.drawMinorGridLines = false
            yAxis.drawMinorTicks = false
            yAxis.drawMajorTicks = false
            yAxis.drawLabels = false

            self.surface.xAxes.add(items: xAxis)
            self.surface.yAxes.add(items: yAxis)
            self.surface.renderableSeries.add(items: lineSeries, dashedSeries )
            self.surface.chartModifiers.add(SCIRolloverModifier())
        }
    }
}

Currently we have two graph surfaces with two Y axes on each side and we need all of the Y axes to have fixed width size. Until now we were achieving that like this:
topGraphSurface.LeftAxisAreaForcedSize = 45;
topGraphSurface.RightAxisAreaForcedSize = 45;
bottomGraphSurface.LeftAxisAreaForcedSize = 45;
bottomGraphSurface.RightAxisAreaForcedSize = 45;

but since updating to the new SciChart v3 we get the error “SciChartSurface does not contain a definition for (Left)AxisAreaForcedSize”. I couldn’t find any information about this in the Migration guide, so is there a way to achieve this in the new version?

Hi, guys

I have some data series like:

[[SCIXyDataSeries alloc] initWithXType:SCIDataType_DateTime
                                 YType:SCIDataType_Double
                             SeriesType:SCITypeOfDataSeries_XCategory];

Also my Y axis is kind of class SCINumericAxis

So my question is

if i’m trying add value to the series

[volumeSerie appendX:SCIGeneric(bar.time) Y:SCIGeneric([bar.volume doubleValue])];

and my bar.volume is bigger than 2 147 483 648 (float limit as i’m know). It’s leads to a axis range crash. Like on the attached image.

So what should i use to handle huge values?
Like a billions and more

Best regards,
Sushynski Andrei

Hi,

I am using SciChart_iOS_SDK_3.0.0.5074 with Swift 5.

I want to show string type on X-axis. I am using below code snippet.

class YearsLabelProvider: SCILabelProviderBase<SCINumericAxis> {

   var xLabels: [String] = ["Test", "Test", "Test", "Test", "Test", "Test", "Test", "Test",     "Test", "Test", "Test", "Test", "Test", "Test"]

   func update(_ axis: ISCIAxisCore!) { }

   override func formatLabel(_ dataValue: ISCIComparable!) -> ISCIString! {
        let index = Int(dataValue.toDouble())
        return NSString(string: index >= 0 && index < xLabels.count ? xLabels[index] : "")
    }

    override func formatCursorLabel(_ dataValue: ISCIComparable!) -> ISCIString! {
        let index = Int(dataValue.toDouble())

        var result: String?

        if (index >= 0 && index < xLabels.count) {
            result = xLabels[index]
        }
        return NSString(string: result!)
    }
}

Application crashes while loading with the following error –

” *** Terminating app due to uncaught exception ‘Initializer not allowed Exception’, reason: ‘Parameterless initializer of Chart.YearsLabelProvider class shouldn’t be used. Please use one of the designated initializers instead'”

Kindly help us resolving this issue since this is a showstopper issue.
I would also like to know about what data SCIXyDataSeries accepts when we are working with strings.

Good day!
I need to determine the value of the visible graph y from the x value and the problem is that I can’t calculate the y value outside of the data I’m rendering
example data:
[
{ x:1, y: 10 },
{ x:5, y: -5 },
{ x: 9, y: 15}
]

I use SCISplineMountainRenderableSeries and I need to show the intersection of the graph at point 3.5
I need a point but I have only one coordinate value

how can i get this y value?

If we set ClipMode.None we can pan infinitely to the uncharted space of left and right. this is fine.
But I want to do panning infinitely only to the left side. So I set ‘clipAtMax’. This is stop panning at right. But instead of panning infinity to the left, it is stretching the left part.
Any solution ?

Hello, I’ve been trying to create a SCIUniformHeatMap, but I only get a blank, black screen.
Can anyone recommend why colors and the graph aren’t showing up? Thanks

var ecmSurface: SCIChartSurface = SCIChartSurface()
var ecmDataSeries = SCIUniformHeatmapDataSeries(xType: .double, yType: .double, zType: .double, xSize: ReviewModeData.MATRIX_COLUMNS, ySize:ReviewModeData.MATRIX_ROWS)
var heatmapRenderableSeries: SCIFastUniformHeatmapRenderableSeries = SCIFastUniformHeatmapRenderableSeries()
private let countColors = 6
private var colorRGBArray: [UIColor] = [
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 131.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 255.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 255.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 128.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1)
]
for i in 0..<ReviewModeData.MATRIX_COLUMNS {
for j in 0 ..< ReviewModeData.MATRIX_ROWS {
ecmDataSeries.update(z: ecm2DMatrix[i][j], atX: i, y: j)
}
}
var colorZValueArray: [Double] = determineColorMapValues(clim1: 0, clim2: 1);
var colorMap = SCIColorMap(colors: colorRGBArray, andStops: colorZValueArray as [NSNumber])

//configure ECM heatmap
heatmapRenderableSeries.minimum = ReviewModeData.ECM_CLIM1
heatmapRenderableSeries.maximum = ReviewModeData.ECM_CLIM2
heatmapRenderableSeries.dataSeries = ecmDataSeries
heatmapRenderableSeries.colorMap = colorMap!

Hi, guys

I’m working with SCIDateTimeAxis type of the X-axis. So my question Is there possibility of skipping non-value period?

Best regards,
Sushynski Andrei

Hi, guys

Is it possible to set min and max zoom constraints for renderable serie with one element ?
Default value (default_zoom.PNG) is too big.

Can you look at this?

Best regards,
Sushynski Andrei

Good day guys. I have download SciChart_iOS_SDK_4.2.0.5533 on Macbook M1. And try to integrate ios-arm64_armv7 verions to my project. I have added SciChart.xcframework to frameworks in Xcode 12.4. But the build is failed with a few errors:

1. unable to load standard library for target arm-64-apple-ios9.0
2. Failed to build module ‘SciChart’ from its module interface, it may have been damaged or it may have triggered a bug in Swift compiler when it was produced.

Can you tell me please did I use the right version of SciChart.xcframework for apple silicone? And how to solve this errors?

I cannot get SCILinearGradientBrushStyle working on a donut chart. Only radial gradients work

Here is my code sample:

let segment = SCIPieSegment()
segment.fillStyle = SCILinearGradientBrushStyle(colorCodeStart: 0xff007aff, finish: 0x4D007aff, direction: .horizontal)
segment.value = 100.0
segment.title = "Segment"
donutSeries.segments.add(segment)

The segment just renders a flat color

Hi, guys

Is there possibility to show tooltip by simply changing switch at the settings?
Not by tapping at the chart area as it implemented now.

Best regards,
Sushynski Andrei

Hey again!

Is there kind of a delegate that notify me if the user uses the crosshair/SCIRolloverModifier?
I want to know which value he is inspecting to show him further information outside the chart for this datapoint.

Thanks and Greeting
Benedikt

I’m trying to make a chart with a “toggle function”.

The “toggle function” what i wanted to make is this.

1. enter to UIViewController which Chart is in it
2. before singleTap on a chart, a chart has zoomPanModifier, XAxisDragModifier,, etc
3. after make singleTap on the chart, that chart has only CursorModifier.
4. CursorModifier’s UI stays on chart without disappearing and i can move crossed line to specific point i want (just like what CursorModifier originally does)
5. another single tap on chart would make a chart to have all other modifiers but CursorModifer.

–

What I have made successfully was 1,2,3,5 . not 4.

The way i was going to solve this problem was make fake touch event on Chart view and
snatch UIGestureRecognizer Event and let ChartView think they’re being touched till I give stop signal

But I heard that there is no more way to pass fake touch to UIView.

So I’m feeling difficulty on this problem…..

is there any easy way to solve this problem?

–

TL;DR;

I WANT TO MAKE CURSORMODIFIER’ UI STAYS ON A CHART!

+)
(lldb) po SciChartVersionNumber
0x3ff0000000000000

(lldb) po SciChartVersionString
0x474f525029232840

I wanted to know what version I’m using.. but i couldn’t know… what version am i using..?

When calling SCIThemeManager.ApplyTheme(Surface, SCIThemeManager.SCIChart_Bright_SparkStyleKey); within a the code-behind running on the iPhoneSimulator running iOS 13.2, the iOS system throws an Objective-C exception with the following details:

Foundation.MonoTouchException: 'Objective-C exception thrown.  Name: NSInternalInconsistencyException Reason: applyThemeProvider: must be implemented in subclass

Although the exact same pattern works without issue on the corresponding Xamarin.Android project and the examples that call this line seem to be OK too, it is not clear from any documentation what this issue could be. Any advice would be appreciated.

The wick for the up candlestick go through the body while the down candlestick do not. How can I make the wick inside the body part disappear? I didn’t change any settings of stroke and fill style. Thanks.

let candlestickSeries = SCIFastCandlestickRenderableSeries()
candlestickSeries.dataSeries = dataSeries
candlestickSeries.yAxisId = "right"

Hi guys,

Is it possible to capture the tap event when we tap on a point marker or a data point? I can see there’s a DataPointSelectionModifier for WPF, but there’s nothing for iOS. Our goal is to show a popup (tooltip) on the point marker when the user taps on it.

Thanks,
Lazar Nikolov

I would like to change the color of chart legend, but have failed to find information on how can I do this for iOS. Any sort of tutorial would be highly appreciated.

Worst case scenario would be to create a custom theme that is based on Bright Spark theme and update legend parameters there, but for this I would need to know what exactly does Bright Spark theme looks like.

Looking forward to any recommendations.

Best Regards,
Paul.

Hi there.

It’s has been asked here:
https://www.scichart.com/questions/question/custom-annotation

So, Is it possible to draw dashed line annotation at the current version 1.2.3.982?

Best regards,
Sushynski Andrei

Hi, guys

Is it possible to use negative index for methods:

-(void) insertAt:(int)index X:(SCIGenericType)x Open:(SCIGenericType)open High:(SCIGenericType)high Low:(SCIGenericType)low Close:(SCIGenericType)close;

-(void) updateAt:(int)index Open:(SCIGenericType)open High:(SCIGenericType)high Low:(SCIGenericType)low Close:(SCIGenericType)close;

Can you give an answer?

Best regards,
Sushynski Andrei

We have lots of Point Markers in our series that overlap, so we’re trying to find a way to Cluster them in Android and iOS. I can see that there is an SCIPointMarkerClusterizer. Can you give us some pointers on how we can achieve point marker clustering and/or spacing?

SplineLineRenderableSeries doesn’t render curved graph line properly in Swift , it renders stepped line for the data series .For reference please check the Screenshot attached ,ECG line(Green) rendered as stepped line (Marked by rectangle). Let me know anything I need to update in my code

Please find below the code for initialisation go the graph and updating the graph same. I am updating graph realtime with same DataSeries.

1. Graph initialisation code

   func init_ECG_Chart()
   {
   //Remove Theme From Chart By Apply & Remove & Change Border color
   SCIThemeManager.applyTheme(to: self.ecg_Chart_Surface, withThemeKey: SCIChart_Bright_SparkStyleKey)
   SCIThemeManager.removeTheme(byThemeKey: SCIChart_Bright_SparkStyleKey)

   self.ecg_Chart_Surface.isOpaque = false
   self.ecg_Chart_Surface.backgroundColor = .clear
   self.ecg_Chart_Surface.renderableSeriesAreaBorderStyle = SCISolidPenStyle(color: .clear, thickness: 0)
   
   //Line
   let lineSeries = SCISplineLineRenderableSeries()
   
   lineSeries.strokeStyle = SCISolidPenStyle(color: ecgSelectedColor, thickness: 2.0)
   lineSeries.dataSeries = ecgLineDataSeries
   

   // lineSeries.resamplingMode = SCIResamplingMode_None //Resampling off
   // lineSeries.resamplingMode = SCIResamplingMode_Auto //Resampling off

   let xAxis = SCINumericAxis()
   xAxis.axisAlignment = .bottom
   xAxis.drawLabels = false
   xAxis.drawMajorGridLines = false
   xAxis.drawMinorGridLines = false
   xAxis.drawMajorTicks = false
   xAxis.drawMinorTicks = false
   
   let yAxis = SCINumericAxis()
   yAxis.axisAlignment = .left
   yAxis.drawLabels = false
   yAxis.drawMajorGridLines = false
   yAxis.drawMinorGridLines = false
   yAxis.drawMajorTicks = false
   yAxis.drawMinorTicks = false
   yAxis.autoRange = .never   //Stop auto ranging axis
   yAxis.visibleRange = SCIDoubleRange(min: -32, max: 96)
   

   // yAxis.visibleRangeLimit = SCIDoubleRange(min: -32, max: 96)

   yAxis.growBy = SCIDoubleRange(min: 0.2, max: 0.2)
   
   SCIUpdateSuspender.usingWith(self.ecg_Chart_Surface) {
   
       self.ecg_Chart_Surface.xAxes.add(items: xAxis)
       self.ecg_Chart_Surface.yAxes.add(items: yAxis)
       self.ecg_Chart_Surface.renderableSeries.add(items: lineSeries)
   
       //self.ecg_Chart_Surface.chartModifiers.add(items: SCIZoomExtentsModifier(),SCIPinchZoomModifier())
   }
   

   } //Init ECG

2. Graph updation code

   func update_ECG_Chart(xValues:SCIDoubleValues,yValues:SCIDoubleValues)
   {

   SCIUpdateSuspender.usingWith(self.ecg_Chart_Surface) {
   
       self.ecgLineDataSeries.append(x: xValues, y: yValues)
     //  self.ecg_Chart_Surface.zoomExtents()
   
       self.ecg_Chart_Surface.zoomExtentsX()
   
   }
   

   } //Update ECG

Hi

I am developing a Xamarin iOS application and I’m using a SCIPieChartSurface. I can create the chart and set its values, but it is not possible to auto-update the donut with new data.
I am trying to update the value by doing:

myDonut.MyPieSegment.Value = newValue;

But nothing happends…

I am placing annotations at the top of every bar in a stacked bar graph (and a standard bar graph on another screen) showing the total of all the stacked bars by iterating through my data, generating the sum, and placing it at the correct x,y (an incredibly manual process that seems like there should be much easier to do but I found no other way to do it – if there is a better way, I would love to hear it, but that’s a secondary issue and not my current problem).

I also have a legend where the user can select / deselect series.

When the user selects/deselects a series from the legend, I need to hide all my annotations and then recreate them because the sums of the stacked bars has changed (or if no bars are showing, remove my annotation completely). My assumption is I could reiterate through my data and check series to see if they are visible (isVisible) and recalculate the sums and recreate the annotations (another very manual process but I can probably work it out).

My primary problem is I see no way for me to intercept that this legend event occurred. The series get hidden internally and I never have a chance to do anything with the annotations. It seems like this may be doable on other platforms but I’m at a loss on iOS. There is no delegate / block event handler / etc.

Any thoughts?