Tag: ios

Hello, I’m trailing your library right now. I would like to be able to move the graph around as well as a cursor on the graph. So I enabled both SCIZoomPanModifier and SCICursorModifier. But since both use one finger panning, the result wasn’t that good. Do you have any guidance for solving the conflict and letting them working together? I’m thinking to do it in the following way: if the touch location is within certain pixel range of the cursor, panning action will move the cursor, otherwise it moves the graph. Is it possible? Thanks

Hi, guys

Please take look at:
http://prntscr.com/gmmib5

So my question is

Is there a way to highlight a line of a gridlines to which the label belong? It can be a color changed or something similar that can be easily perceived by the user.

Best regards,
Sushynski Andrei

So I want to draw multiple charts so is there any way I can have stacked yAxes like yAxis 2 should be drawn below yAxis1. I have gone through your example and there I got that we can add multiple surface but its becoming difficult for us to show a crosshair on all surfaces since we have a custom cross hair. Can you guide on same. Thanks in advance

Hi

I am developing a Xamarin iOS application and I’m using a SCIPieChartSurface. I can create the chart and set its values, but is is not possible to auto-update the donut with new data.
I am trying to update the value by doing:

myDonut.MyPieSegment.Value = newValue;

But nothing happends…

I heard it was a bug in the API for Android a month ago, is this similar? Or am I doing something wrong?
Thanks in advance!

Best regards
Jonas

I’m trying to clear a SCIUniformHeatmapDataSeries after connecting it to a SCIChartSurface, but it is very slow and energy consuming. However, if I clear the data series before it is connected to the sci chart, then the clearing is pretty fast. How can I clear the data series after it is connected to the chart surface quickly? Do I have to make a new data series, clear it, and connect to the scichartsurface every time I want to clear a data series? This is for iOS by the way.
EDIT: code

for i in 0..<data.MATRIX_COLUMNS {
        for j in 0..<data.MATRIX_ROWS  {
            data.ecm2DMatrix[i][j] = Double.nan
            SCIUpdateSuspender.usingWith(charts.ecmSurface) {
                self.data.ecmDataSeries.update(z:self.data.ecm2DMatrix[i][j], atX: i, y: j)
            }

Hi Guys,

I am not able to figure out solution for handling NAN values in iOS which is available in Android in case of FastLineRenderableSeries.

Thanks

We have lots of Point Markers in our series that overlap, so we’re trying to find a way to Cluster them in Android and iOS. I can see that there is an SCIPointMarkerClusterizer. Can you give us some pointers on how we can achieve point marker clustering and/or spacing?

I need someone to develop this chart for me and I will provide a JSON, for the data.

https://www.youtube.com/watch?v=t29Zl-7QyMw&t=215s
Please go to time line 3:22

I have been struggling in the documentation and if someone can create this chart for me, I will be more than happy to pay you.

The chart would have to be created for Swift 4 please.

Robert

Hi guys,

Is it possible to capture the tap event when we tap on a point marker or a data point? I can see there’s a DataPointSelectionModifier for WPF, but there’s nothing for iOS. Our goal is to show a popup (tooltip) on the point marker when the user taps on it.

Thanks,
Lazar Nikolov

On device, there is an unwanted border line on the SCIChartSurface. Please refer to the screenshot.

I tried removing this by setting the border width and setting it’s colour as white as below
self.surface.view.layer.borderColor = [[UIColor whiteColor]CGColor];
self.surface.view.layer.borderWidth = 2.0f;
However, this does not set the border of the SCIChartSurface.

How do I remove this unwanted border line?

Hi, guys

I’m working with SCIDateTimeAxis type of the X-axis. So my question Is there possibility of skipping non-value period?

Best regards,
Sushynski Andrei

Hello, I’ve been trying to create a SCIUniformHeatMap, but I only get a blank, black screen.
Can anyone recommend why colors and the graph aren’t showing up? Thanks

var ecmSurface: SCIChartSurface = SCIChartSurface()
var ecmDataSeries = SCIUniformHeatmapDataSeries(xType: .double, yType: .double, zType: .double, xSize: ReviewModeData.MATRIX_COLUMNS, ySize:ReviewModeData.MATRIX_ROWS)
var heatmapRenderableSeries: SCIFastUniformHeatmapRenderableSeries = SCIFastUniformHeatmapRenderableSeries()
private let countColors = 6
private var colorRGBArray: [UIColor] = [
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 131.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 255.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 255.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 128.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1)
]
for i in 0..<ReviewModeData.MATRIX_COLUMNS {
for j in 0 ..< ReviewModeData.MATRIX_ROWS {
ecmDataSeries.update(z: ecm2DMatrix[i][j], atX: i, y: j)
}
}
var colorZValueArray: [Double] = determineColorMapValues(clim1: 0, clim2: 1);
var colorMap = SCIColorMap(colors: colorRGBArray, andStops: colorZValueArray as [NSNumber])

//configure ECM heatmap
heatmapRenderableSeries.minimum = ReviewModeData.ECM_CLIM1
heatmapRenderableSeries.maximum = ReviewModeData.ECM_CLIM2
heatmapRenderableSeries.dataSeries = ecmDataSeries
heatmapRenderableSeries.colorMap = colorMap!

I want to hide the axis and the place occupied by the axis on xammarin.iOS, i’am using below code to do the same, the problem here is it does hide the axis but it is not removing the place occupied by axis,

Axis.IsVisible = false;

is it the right way to hide the axis and remove the place occupied by it, or am I missing something here.

When calling SCIThemeManager.ApplyTheme(Surface, SCIThemeManager.SCIChart_Bright_SparkStyleKey); within a the code-behind running on the iPhoneSimulator running iOS 13.2, the iOS system throws an Objective-C exception with the following details:

Foundation.MonoTouchException: 'Objective-C exception thrown.  Name: NSInternalInconsistencyException Reason: applyThemeProvider: must be implemented in subclass

Although the exact same pattern works without issue on the corresponding Xamarin.Android project and the examples that call this line seem to be OK too, it is not clear from any documentation what this issue could be. Any advice would be appreciated.

Hi, guys

I have some data series like:

[[SCIXyDataSeries alloc] initWithXType:SCIDataType_DateTime
                                 YType:SCIDataType_Double
                             SeriesType:SCITypeOfDataSeries_XCategory];

Also my Y axis is kind of class SCINumericAxis

So my question is

if i’m trying add value to the series

[volumeSerie appendX:SCIGeneric(bar.time) Y:SCIGeneric([bar.volume doubleValue])];

and my bar.volume is bigger than 2 147 483 648 (float limit as i’m know). It’s leads to a axis range crash. Like on the attached image.

So what should i use to handle huge values?
Like a billions and more

Best regards,
Sushynski Andrei

Hi, guys

My axis is SCICategoryDateTimeAxis type. And using SCIZoomPanModifier (SCIClipMode_ClipAtExtents) to scroll chart

I’m using setVisibleRangeLimit: method to clip the axis during ZoomExtents

Until v. 2.0.0.1511 it’s work like a charm. But now something had have broken. And it’s doesn’t allow me to scroll chart at right way. It show me all of the data range on chart or only left side.

So can you fix it?

Best regards,
Sushynski Andrei

Hello, I’m trailing your library right now. I’m wondering how to change the background color of the legend box. The document page for LegendModifier shows coming soon. I don’t see such option in LegendModifier definition in Xcode either. Thanks

Hi all,

Why the API’s for iOS, Android and WPF are not identically?
I have seen many samples on the forum, but to adapt it to a different platform is very hard.
A lot of classes are different for each platform.

• Is there any “comparison” for the different platforms?
• Is this planned to unify the API’s?

Regards
Urs

After upgraded SciChart to SciChart_iOS_SDK_3.0.0.5074, using rollover modifier on a SciChart surface which was embedded into a scroll view will crash the app. It crashed when user scroll horizontally on a SciChart surface inside a horizontal scrollable scrollview. It is the same with the vertically scrollable scrollview.

2020-03-09 10:14:15.489302+0800 ******[4835:62890] -[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500

2020-03-09 10:14:15.503967+0800 *******[4835:62890] *** Terminating app due to uncaught exception ‘NSInvalidArgumentException’, reason: ‘-[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500’
*** First throw call stack:
(
0 CoreFoundation 0x00007fff23c7127e exceptionPreprocess + 350
1 libobjc.A.dylib 0x00007fff513fbb20 objc_exception_throw + 48
2 CoreFoundation 0x00007fff23c91fd4 -[NSObject(NSObject) doesNotRecognizeSelector:] + 132
3 CoreFoundation 0x00007fff23c75c4c forwarding + 1436
4 CoreFoundation 0x00007fff23c77f78 _CF_forwarding_prep_0 + 120
5 SciChart 0x000000011139aaba -[SCITouchModifierBase onEvent:] + 186
6 SciChart 0x000000011135dfd8 +[SCIEventManager raiseOnEvent:toTarget:isMaster:] + 267
7 SciChart 0x000000011132d03f __38-[SCIEventDispatcher p_SCI_commonInit]_block_invoke + 165
8 SciChart 0x000000011132d45d -[SCIEventDispatcher raiseOnEvent:withAction:] + 569
9 SciChart 0x000000011133fa94 -[SCIChartSurfaceBase p_SCI_onTouchEvent:] + 233
10 SciChart 0x000000011133f996 -[SCIChartSurfaceBase touchesCancelled:withEvent:] + 209
11 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
12 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
13 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
14 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
15 UIKitCore 0x00007fff480a4a43 __106-[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:]_block_invoke + 609
16 UIKitCore 0x00007fff480a429e -[UIApplication _cancelTouchesOrPresses:withEvent:includingGestures:notificationBlock:] + 1163
17 UIKitCore 0x00007fff480a47ac -[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:] + 158
18 UIKitCore 0x00007fff47c37f2f -[UIGestureEnvironment _cancelTouches:event:] + 707
19 UIKitCore 0x00007fff47c40115 -[UIGestureRecognizer _updateGestureForActiveEvents] + 1779
20 UIKitCore 0x00007fff47c31eda _UIGestureEnvironmentUpdate + 2706
21 UIKitCore 0x00007fff47c3140a -[UIGestureEnvironment _deliverEvent:toGestureRecognizers:usingBlock:] + 467
22 UIKitCore 0x00007fff47c3117f -[UIGestureEnvironment _updateForEvent:window:] + 200
23 UIKitCore 0x00007fff480d04b0 -[UIWindow sendEvent:] + 4574
24 UIKitCore 0x00007fff480ab53b -[UIApplication sendEvent:] + 356
25 UIKit 0x0000000114ad2bd4 -[UIApplicationAccessibility sendEvent:] + 85
26 UIKitCore 0x00007fff4812c71a __dispatchPreprocessedEventFromEventQueue + 6847
27 UIKitCore 0x00007fff4812f1e0 __handleEventQueueInternal + 5980
28 CoreFoundation 0x00007fff23bd4471 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION + 17
29 CoreFoundation 0x00007fff23bd439c __CFRunLoopDoSource0 + 76
30 CoreFoundation 0x00007fff23bd3b74 __CFRunLoopDoSources0 + 180
31 CoreFoundation 0x00007fff23bce87f __CFRunLoopRun + 1263
32 CoreFoundation 0x00007fff23bce066 CFRunLoopRunSpecific + 438
33 GraphicsServices 0x00007fff384c0bb0 GSEventRunModal + 65
34 UIKitCore 0x00007fff48092d4d UIApplicationMain + 1621
35 ****** 0x000000010b51505f main + 143
36 libdyld.dylib 0x00007fff5227ec25 start + 1
37 ??? 0x0000000000000001 0x0 + 1
)

I’m getting the following crash:

2020-02-14 16:45:43.902812-0500 CommonStock Development[2425:710225] -[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x282ffe080
2020-02-14 16:45:43.904098-0500 CommonStock Development[2425:710225] *** Terminating app due to uncaught exception ‘NSInvalidArgumentException’, reason: ‘-[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x282ffe080’

whenever I try to scrub my chart, I must also note that in order for the legend to show, I have to tap really hard on the surface.

This is my code:

func set(data set: SimpleChartDataSet, alternate: SimpleChartDataSet) {

    let lineDataSeries = SCIXyDataSeries(xType: .double, yType: .double)
    let dashedDataSeries = SCIXyDataSeries(xType: .double, yType: .double)

    let group = DispatchGroup()
    group.enter()

    DispatchQueue.global(qos: .userInteractive).async {
        for (index, i) in set.enumerated() {
            lineDataSeries.append(x: Double(index), y: Double(i))
        }

        for (index, i) in alternate.enumerated() {
            dashedDataSeries.append(x: Double(index), y: Double(i))
        }

        group.leave()
    }

    group.notify(queue: .main) {

        let lineSeries = SCIFastMountainRenderableSeries()
        lineSeries.zeroLineY = set.min() ?? 0.0
        lineSeries.dataSeries = lineDataSeries
        lineSeries.strokeStyle = SCISolidPenStyle(color: UIColor.green, thickness: 2.0)
        lineSeries.areaStyle =  SCILinearGradientBrushStyle(start: CGPoint(x: 0, y: 1), end: CGPoint(x: 0, y: 0), start: UIColor.green, end: UIColor.clear)

        let dashedSeries = SCIFastLineRenderableSeries()
        dashedSeries.zeroLineY = set.min() ?? 0.0
        dashedSeries.dataSeries = dashedDataSeries
        dashedSeries.strokeStyle = SCISolidPenStyle(color: UIColor.white, thickness: 2.0, strokeDashArray: [2.0,2.0,2.0,2.0])

        SCIUpdateSuspender.usingWith(self.surface) {

            self.surface.xAxes.clear()
            self.surface.yAxes.clear()
            self.surface.renderableSeries.clear()

            let xAxis = SCINumericAxis()
            xAxis.drawLabels = false
            xAxis.drawMajorBands = false
            xAxis.drawMajorGridLines = false
            xAxis.drawMinorGridLines = false
            xAxis.drawMinorTicks = false
            xAxis.drawMajorTicks = false
            xAxis.drawLabels = false

            let yAxis = SCINumericAxis()
            yAxis.drawLabels = false
            yAxis.drawMajorBands = false
            yAxis.drawMajorGridLines = false
            yAxis.drawMinorGridLines = false
            yAxis.drawMinorTicks = false
            yAxis.drawMajorTicks = false
            yAxis.drawLabels = false

            self.surface.xAxes.add(items: xAxis)
            self.surface.yAxes.add(items: yAxis)
            self.surface.renderableSeries.add(items: lineSeries, dashedSeries )
            self.surface.chartModifiers.add(SCIRolloverModifier())
        }
    }
}

Hi, guys

Is it possible to use negative index for methods:

-(void) insertAt:(int)index X:(SCIGenericType)x Open:(SCIGenericType)open High:(SCIGenericType)high Low:(SCIGenericType)low Close:(SCIGenericType)close;

-(void) updateAt:(int)index Open:(SCIGenericType)open High:(SCIGenericType)high Low:(SCIGenericType)low Close:(SCIGenericType)close;

Can you give an answer?

Best regards,
Sushynski Andrei

Hi

I am developing a Xamarin iOS application and I’m using a SCIPieChartSurface. I can create the chart and set its values, but it is not possible to auto-update the donut with new data.
I am trying to update the value by doing:

myDonut.MyPieSegment.Value = newValue;

But nothing happends…

How would I go about doing this in swift?

Hi, guys

I’m interesting in alignment for line at SCIAxisMarkerAnnotation. For example for top, middle and bottom position. Like at alignment_to_top.png. So is there some possibility for this?

UDP: Is there possibility to hide annotation from chart view?
Something like setHidden: for UIView.

Best regards,
Sushynski Andrei

I am using sci charts to show live graphs of some devices. While displaying a graph on IPhone X or iPhone 6s it sometimes lags and lines started overlapping. It’s working fine on devices iPhone XSMax, iPhone 11. I have attached a 3 screenshots. Once when graph starts lagging, 2nd when graph is in middle, 3 when graph completes. please have a look. It starts lagging and overlapping lines when a new graph starts and when it ends it shows a complete graph shown and then again same issue repeats. It also started working correctly after some time. I need information about this issue. How to fix it and why it’s happening like this…

The wick for the up candlestick go through the body while the down candlestick do not. How can I make the wick inside the body part disappear? I didn’t change any settings of stroke and fill style. Thanks.

let candlestickSeries = SCIFastCandlestickRenderableSeries()
candlestickSeries.dataSeries = dataSeries
candlestickSeries.yAxisId = "right"

Currently we have two graph surfaces with two Y axes on each side and we need all of the Y axes to have fixed width size. Until now we were achieving that like this:
topGraphSurface.LeftAxisAreaForcedSize = 45;
topGraphSurface.RightAxisAreaForcedSize = 45;
bottomGraphSurface.LeftAxisAreaForcedSize = 45;
bottomGraphSurface.RightAxisAreaForcedSize = 45;

but since updating to the new SciChart v3 we get the error “SciChartSurface does not contain a definition for (Left)AxisAreaForcedSize”. I couldn’t find any information about this in the Migration guide, so is there a way to achieve this in the new version?

Hi, guys

My X axis is SCICategoryDateTimeAxis type.

And i have a huge amount of data to display. So i need to display it by scrolling of the chart surface.
So what is the best practice to update data series on the fly and display it at the chart surface?

Best regards,
Sushynski Andrei

Is the styleFor function of SCIPaletteProvider that was in Version 2.0 not implemented in Version 4.8?
Also, are there any plans to implement it?

I am upgrading from SciCharts 2.0.1 to SciCharts 4.3.
When the color was set using SCI Palatt Provider in Version 2.0, the memory used was 200M, but in Version 4.3, the memory used may consume as much as 1G.
I tried to devise it by setting the Sampleing Mode, but it is not very effective.

SCI Charts is used to display the spectrum data of audio data while playing the sound.

Hi.
I’m in process optimizing my app.
I’m using Objective-c.

I’d found some memory leaking issues and successfully fixed some of that.

A first issue was about ‘renderableSeries’ under ‘SCIChartSurfaceView’.
If you set class of UIView as ‘SCIChartSurfaceView’ in interface builder and make outlet without setting ‘strong’ or ‘weak’ in .m file,
It never get released automatically and will stay retained on memory.
For me, it caused about 90MB of memory leaking.
But I could solve this issue manually by putting -(void)clear; method of renderableSeries in viewWillDisappear method.

Another issue is about ‘SCIDateTimeDeltaCalculator’ and ‘SCINumericDeltaCalculator’.
It causes about 50MB of memory leaking.
But problem is, I couldn’t find neither where it’s been called nor how I release this manually.

I will be waiting for your answer.

Thanks.

+)
(lldb) po SciChartVersionNumber
0x3ff0000000000000

(lldb) po SciChartVersionString
0x474f525029232840

I wanted to know what version I’m using.. but i couldn’t know… what version am i using..?

Hi there.

It’s has been asked here:
https://www.scichart.com/questions/question/custom-annotation

So, Is it possible to draw dashed line annotation at the current version 1.2.3.982?

Best regards,
Sushynski Andrei

Hello,

The problem is how to sign the X-axis (the time axis).
How can I change the date and time format on the x axis?
Is this possible when I use the SCICategoryDateTimeAxis?
We use the code from example to set the time format

I try to make a text formatting for my chart on IOS and Android, regarding your documentation:

IOS:
https://www.scichart.com/documentation/ios/current/axis-labels—textformatting-and-cursortextformatting.html
yAxis.textFormatting = “$0.0”

Android:
https://www.scichart.com/documentation/android/current/Axis%20Labels%20-%20TextFormatting%20and%20CursorTextFormatting.html
yAxis.setTextFormatting(“$0.0000”);

I checked my code and its the same like yours. On Android i have:

// yAxis filed with type IAxis
private IAxis yAxis;

// create
yAxis = sciChartBuilder
.newNumericAxis()
.withGrowBy(0.01d, 0.1d)
.withDrawLabels(true)
.withDrawMajorGridLines(true)
.withDrawMinorGridLines(false)
.withDrawMajorBands(false)
.withDrawMajorTicks(false)
.build();

// the set textFormatting:
yAxis.setTextFormatting(“$0.0000”);

On IOS i have:

var yAxis: SCINumericAxis?
self.yAxis = SCINumericAxis()
self.yAxis?.textFormatting = “$0.0”

But it is not working, can you tell me please why? What I’m doing wrong?