Tag: ios

Hi, guys

I want to show two renderableSeries on one chart view. These series have common x-axis (SCICategoryDateTimeAxis) and separate y-axes(SCINumericAxis). Only one of y-axis is visible at chart view. Also the data series of visible renderable series updated by scrolling to left or to right. So for displaying on one view i’m using:

[y1Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.3) Max:SCIGeneric(0.07)]];
[y2Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.0) Max:SCIGeneric(5)]];

So it’s look good at start (Correct_zooming.png). But after some scrolling it decrease axis extents of invisible y-axis (decrease.png).
Or even breaks down (broken.png)

For test i’m using SCIFastOhlcRenderableSeries and SCIHorizontallyStackedColumnsCollection readerable series.
Data series for SCIHorizontallyStackedColumnsCollection is initializated like:

    [volumeSerie1 updateAt:index Y:SCIGeneric(100000 / [multiplier doubleValue])];
    [volumeSerie2 updateAt:index Y:SCIGeneric(500000 / [multiplier doubleValue])];

So can you look at it?
Or what way i should implement this behavior?

Best regards,
Sushynski Andrei

Hi,

I’ve encountered an issue with the candlestick graph I’ve drawn that consists of a set of random X date time values – this causes the candlesticks have varying distances from one another.

Rendering the data from an initial set seems to be fine but as I run a NSTimer to add on more points, the body of the new candlesticks seem to be 0. (Note, the date time values are still random but have been made to be set after the last placed point)

In fact, the initial data points that I added see to be rendered ‘body-less’ if it’s within the same visible range as the newly added points. And if I pan along the newly added points, the bodies of some data points will appear at random visible ranges.

Is this a normal behaviour or should I take anything else into consideration?

Here are a couple of my configurations which I think may have affected anything:
1. My XAxis has set its visible range limit mode to ClipMode_Min
2. Candlestick series style data body width is set to be default.
3. I have a the following modifiers set up.

self.xDragModifier = [SCIXAxisDragModifier new];
self.xDragModifier.axisId = @"xAxis";
self.xDragModifier.dragMode = SCIAxisDragMode_Pan;
self.xDragModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
[self.xDragModifier setModifierName:@"XAxis DragModifier"];

self.pinchZoomModifier = [[SCIPinchZoomModifier alloc] init];
[self.pinchZoomModifier setModifierName:@"PinchZoom Modifier"];
self.pinchZoomModifier.xyDirection = SCIXYDirection_XDirection;

self.zoomPanModifier = [SCIZoomPanModifier new];
self.zoomPanModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
self.zoomPanModifier.xyDirection = SCIXYDirection_XDirection;
[self.zoomPanModifier setModifierName:@"ZoomPan Modifier"];

SCIModifierGroup * gm = [[SCIModifierGroup alloc] initWithChildModifiers:@[self.xDragModifier, self.pinchZoomModifier, self.zoomPanModifier]];
self.chartSurface.chartModifier = gm;

The points are drawing just fine, but the body of the candlestick is not appearing as expected.

Thanks in advance.

Is the styleFor function of SCIPaletteProvider that was in Version 2.0 not implemented in Version 4.8?
Also, are there any plans to implement it?

I am upgrading from SciCharts 2.0.1 to SciCharts 4.3.
When the color was set using SCI Palatt Provider in Version 2.0, the memory used was 200M, but in Version 4.3, the memory used may consume as much as 1G.
I tried to devise it by setting the Sampleing Mode, but it is not very effective.

SCI Charts is used to display the spectrum data of audio data while playing the sound.

When search this forum, I found that we can achieve it by adding point marker. But I am getting this error when trying to add point marker :
‘Operation: setPointMarker: is not avaliable on type: SCIHorizontallyStackedColumnsCollection’

let me know this feature(round top corners of bars) is availble or not ! Or is there any way to do this ?

Hi

I am developing a Xamarin iOS application and I’m using a SCIPieChartSurface. I can create the chart and set its values, but is is not possible to auto-update the donut with new data.
I am trying to update the value by doing:

myDonut.MyPieSegment.Value = newValue;

But nothing happends…

I heard it was a bug in the API for Android a month ago, is this similar? Or am I doing something wrong?
Thanks in advance!

Best regards
Jonas

Hi, guys

What is the minimum required sdk version for SciChart v.2?

Such as i have some trouble with IOS 9. See attachment.

Same behavior at real devices.

Can you look at this?

Best regards,
Sushynski Andrei

Hi, guys

My x axis is SCICategoryDateTimeAxis class type. And it’s limited by VisiableRangeLimit like:

[xAxis setVisibleRangeLimit:[[SCIDoubleRange alloc] initWithMin:SCIGeneric(firstItem – (lastItem – priorItem))
Max:SCIGeneric(lastItem + (lastItem – priorItem))]];

Also for scrolling my content inside chart:

SCIZoomPanModifier * zpm = [[SCIZoomPanModifier alloc] init];
[zpm setModifierName:@"PanZoom Modifier"];
[zpm setClipModeX:SCIZoomPanClipMode_ClipAtExtents];

Like a description SCIZoomPanClipMode_ClipAtExtents says:
“forces the panning operation to stop suddenly at the extents of the data” – but it’s not working constantly.
Sometimes it’s allow to scroll outside the range. Like on the attached image.

So my question is how to limit scrolling by min and max value?

Best regards,
Sushynski Andrei

Good day!
I need to determine the value of the visible graph y from the x value and the problem is that I can’t calculate the y value outside of the data I’m rendering
example data:
[
{ x:1, y: 10 },
{ x:5, y: -5 },
{ x: 9, y: 15}
]

I use SCISplineMountainRenderableSeries and I need to show the intersection of the graph at point 3.5
I need a point but I have only one coordinate value

how can i get this y value?

If we set ClipMode.None we can pan infinitely to the uncharted space of left and right. this is fine.
But I want to do panning infinitely only to the left side. So I set ‘clipAtMax’. This is stop panning at right. But instead of panning infinity to the left, it is stretching the left part.
Any solution ?

On device, there is an unwanted border line on the SCIChartSurface. Please refer to the screenshot.

I tried removing this by setting the border width and setting it’s colour as white as below
self.surface.view.layer.borderColor = [[UIColor whiteColor]CGColor];
self.surface.view.layer.borderWidth = 2.0f;
However, this does not set the border of the SCIChartSurface.

How do I remove this unwanted border line?

I’m getting the following crash:

2020-02-14 16:45:43.902812-0500 CommonStock Development[2425:710225] -[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x282ffe080
2020-02-14 16:45:43.904098-0500 CommonStock Development[2425:710225] *** Terminating app due to uncaught exception ‘NSInvalidArgumentException’, reason: ‘-[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x282ffe080’

whenever I try to scrub my chart, I must also note that in order for the legend to show, I have to tap really hard on the surface.

This is my code:

func set(data set: SimpleChartDataSet, alternate: SimpleChartDataSet) {

    let lineDataSeries = SCIXyDataSeries(xType: .double, yType: .double)
    let dashedDataSeries = SCIXyDataSeries(xType: .double, yType: .double)

    let group = DispatchGroup()
    group.enter()

    DispatchQueue.global(qos: .userInteractive).async {
        for (index, i) in set.enumerated() {
            lineDataSeries.append(x: Double(index), y: Double(i))
        }

        for (index, i) in alternate.enumerated() {
            dashedDataSeries.append(x: Double(index), y: Double(i))
        }

        group.leave()
    }

    group.notify(queue: .main) {

        let lineSeries = SCIFastMountainRenderableSeries()
        lineSeries.zeroLineY = set.min() ?? 0.0
        lineSeries.dataSeries = lineDataSeries
        lineSeries.strokeStyle = SCISolidPenStyle(color: UIColor.green, thickness: 2.0)
        lineSeries.areaStyle =  SCILinearGradientBrushStyle(start: CGPoint(x: 0, y: 1), end: CGPoint(x: 0, y: 0), start: UIColor.green, end: UIColor.clear)

        let dashedSeries = SCIFastLineRenderableSeries()
        dashedSeries.zeroLineY = set.min() ?? 0.0
        dashedSeries.dataSeries = dashedDataSeries
        dashedSeries.strokeStyle = SCISolidPenStyle(color: UIColor.white, thickness: 2.0, strokeDashArray: [2.0,2.0,2.0,2.0])

        SCIUpdateSuspender.usingWith(self.surface) {

            self.surface.xAxes.clear()
            self.surface.yAxes.clear()
            self.surface.renderableSeries.clear()

            let xAxis = SCINumericAxis()
            xAxis.drawLabels = false
            xAxis.drawMajorBands = false
            xAxis.drawMajorGridLines = false
            xAxis.drawMinorGridLines = false
            xAxis.drawMinorTicks = false
            xAxis.drawMajorTicks = false
            xAxis.drawLabels = false

            let yAxis = SCINumericAxis()
            yAxis.drawLabels = false
            yAxis.drawMajorBands = false
            yAxis.drawMajorGridLines = false
            yAxis.drawMinorGridLines = false
            yAxis.drawMinorTicks = false
            yAxis.drawMajorTicks = false
            yAxis.drawLabels = false

            self.surface.xAxes.add(items: xAxis)
            self.surface.yAxes.add(items: yAxis)
            self.surface.renderableSeries.add(items: lineSeries, dashedSeries )
            self.surface.chartModifiers.add(SCIRolloverModifier())
        }
    }
}

Hi, guys

I have some data series like:

[[SCIXyDataSeries alloc] initWithXType:SCIDataType_DateTime
                                 YType:SCIDataType_Double
                             SeriesType:SCITypeOfDataSeries_XCategory];

Also my Y axis is kind of class SCINumericAxis

So my question is

if i’m trying add value to the series

[volumeSerie appendX:SCIGeneric(bar.time) Y:SCIGeneric([bar.volume doubleValue])];

and my bar.volume is bigger than 2 147 483 648 (float limit as i’m know). It’s leads to a axis range crash. Like on the attached image.

So what should i use to handle huge values?
Like a billions and more

Best regards,
Sushynski Andrei

Currently we have two graph surfaces with two Y axes on each side and we need all of the Y axes to have fixed width size. Until now we were achieving that like this:
topGraphSurface.LeftAxisAreaForcedSize = 45;
topGraphSurface.RightAxisAreaForcedSize = 45;
bottomGraphSurface.LeftAxisAreaForcedSize = 45;
bottomGraphSurface.RightAxisAreaForcedSize = 45;

but since updating to the new SciChart v3 we get the error “SciChartSurface does not contain a definition for (Left)AxisAreaForcedSize”. I couldn’t find any information about this in the Migration guide, so is there a way to achieve this in the new version?

Hi,

I am using SciChart_iOS_SDK_3.0.0.5074 with Swift 5.

I want to show string type on X-axis. I am using below code snippet.

class YearsLabelProvider: SCILabelProviderBase<SCINumericAxis> {

   var xLabels: [String] = ["Test", "Test", "Test", "Test", "Test", "Test", "Test", "Test",     "Test", "Test", "Test", "Test", "Test", "Test"]

   func update(_ axis: ISCIAxisCore!) { }

   override func formatLabel(_ dataValue: ISCIComparable!) -> ISCIString! {
        let index = Int(dataValue.toDouble())
        return NSString(string: index >= 0 && index < xLabels.count ? xLabels[index] : "")
    }

    override func formatCursorLabel(_ dataValue: ISCIComparable!) -> ISCIString! {
        let index = Int(dataValue.toDouble())

        var result: String?

        if (index >= 0 && index < xLabels.count) {
            result = xLabels[index]
        }
        return NSString(string: result!)
    }
}

Application crashes while loading with the following error –

” *** Terminating app due to uncaught exception ‘Initializer not allowed Exception’, reason: ‘Parameterless initializer of Chart.YearsLabelProvider class shouldn’t be used. Please use one of the designated initializers instead'”

Kindly help us resolving this issue since this is a showstopper issue.
I would also like to know about what data SCIXyDataSeries accepts when we are working with strings.

Hello!

I am building an iOS framework that sits on top of SciChart for app developers within our company. I’d like to provide my own default SCIThemeColorProvider object for charts in my framework. Easiest way to do that is to include my own theme plist in my framework’s bundle, but I cannot currently do that (as of 2.0.0.1643) because the SCIThemeColorProvider initializer assumes it’s either in the “Charting.SciChart” bundle or the main bundle.

I’d like to propose modifying SCIThemeColorProvider to add another initializer that takes a bundle ID, like this:

/**
 * Creates theme provider based on specified style
 *
 * @param themeKey The key of style which should be used as base for this theme provider
 *
 * @param bundleIdentifier The identifier of the bundle containing the theme plist identified by 
 *                         themeKey; if nil, the main bundle is used.
 */
- (nullable instancetype)initWithThemeKey:(nonnull NSString*)themeKey bundleIdentifier:(nullable NSString*)bundleIdentifier;

The existing -initWithThemeKey: initializer would call through to this initializer with a nil bundle ID.

I have attached a patch file with this proposed change. Could this be added to an upcoming build?

So I want to draw multiple charts so is there any way I can have stacked yAxes like yAxis 2 should be drawn below yAxis1. I have gone through your example and there I got that we can add multiple surface but its becoming difficult for us to show a crosshair on all surfaces since we have a custom cross hair. Can you guide on same. Thanks in advance

I try to make a text formatting for my chart on IOS and Android, regarding your documentation:

IOS:
https://www.scichart.com/documentation/ios/current/axis-labels—textformatting-and-cursortextformatting.html
yAxis.textFormatting = “$0.0”

Android:
https://www.scichart.com/documentation/android/current/Axis%20Labels%20-%20TextFormatting%20and%20CursorTextFormatting.html
yAxis.setTextFormatting(“$0.0000”);

I checked my code and its the same like yours. On Android i have:

// yAxis filed with type IAxis
private IAxis yAxis;

// create
yAxis = sciChartBuilder
.newNumericAxis()
.withGrowBy(0.01d, 0.1d)
.withDrawLabels(true)
.withDrawMajorGridLines(true)
.withDrawMinorGridLines(false)
.withDrawMajorBands(false)
.withDrawMajorTicks(false)
.build();

// the set textFormatting:
yAxis.setTextFormatting(“$0.0000”);

On IOS i have:

var yAxis: SCINumericAxis?
self.yAxis = SCINumericAxis()
self.yAxis?.textFormatting = “$0.0”

But it is not working, can you tell me please why? What I’m doing wrong?

After upgraded SciChart to SciChart_iOS_SDK_3.0.0.5074, using rollover modifier on a SciChart surface which was embedded into a scroll view will crash the app. It crashed when user scroll horizontally on a SciChart surface inside a horizontal scrollable scrollview. It is the same with the vertically scrollable scrollview.

2020-03-09 10:14:15.489302+0800 ******[4835:62890] -[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500

2020-03-09 10:14:15.503967+0800 *******[4835:62890] *** Terminating app due to uncaught exception ‘NSInvalidArgumentException’, reason: ‘-[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500’
*** First throw call stack:
(
0 CoreFoundation 0x00007fff23c7127e exceptionPreprocess + 350
1 libobjc.A.dylib 0x00007fff513fbb20 objc_exception_throw + 48
2 CoreFoundation 0x00007fff23c91fd4 -[NSObject(NSObject) doesNotRecognizeSelector:] + 132
3 CoreFoundation 0x00007fff23c75c4c forwarding + 1436
4 CoreFoundation 0x00007fff23c77f78 _CF_forwarding_prep_0 + 120
5 SciChart 0x000000011139aaba -[SCITouchModifierBase onEvent:] + 186
6 SciChart 0x000000011135dfd8 +[SCIEventManager raiseOnEvent:toTarget:isMaster:] + 267
7 SciChart 0x000000011132d03f __38-[SCIEventDispatcher p_SCI_commonInit]_block_invoke + 165
8 SciChart 0x000000011132d45d -[SCIEventDispatcher raiseOnEvent:withAction:] + 569
9 SciChart 0x000000011133fa94 -[SCIChartSurfaceBase p_SCI_onTouchEvent:] + 233
10 SciChart 0x000000011133f996 -[SCIChartSurfaceBase touchesCancelled:withEvent:] + 209
11 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
12 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
13 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
14 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
15 UIKitCore 0x00007fff480a4a43 __106-[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:]_block_invoke + 609
16 UIKitCore 0x00007fff480a429e -[UIApplication _cancelTouchesOrPresses:withEvent:includingGestures:notificationBlock:] + 1163
17 UIKitCore 0x00007fff480a47ac -[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:] + 158
18 UIKitCore 0x00007fff47c37f2f -[UIGestureEnvironment _cancelTouches:event:] + 707
19 UIKitCore 0x00007fff47c40115 -[UIGestureRecognizer _updateGestureForActiveEvents] + 1779
20 UIKitCore 0x00007fff47c31eda _UIGestureEnvironmentUpdate + 2706
21 UIKitCore 0x00007fff47c3140a -[UIGestureEnvironment _deliverEvent:toGestureRecognizers:usingBlock:] + 467
22 UIKitCore 0x00007fff47c3117f -[UIGestureEnvironment _updateForEvent:window:] + 200
23 UIKitCore 0x00007fff480d04b0 -[UIWindow sendEvent:] + 4574
24 UIKitCore 0x00007fff480ab53b -[UIApplication sendEvent:] + 356
25 UIKit 0x0000000114ad2bd4 -[UIApplicationAccessibility sendEvent:] + 85
26 UIKitCore 0x00007fff4812c71a __dispatchPreprocessedEventFromEventQueue + 6847
27 UIKitCore 0x00007fff4812f1e0 __handleEventQueueInternal + 5980
28 CoreFoundation 0x00007fff23bd4471 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION + 17
29 CoreFoundation 0x00007fff23bd439c __CFRunLoopDoSource0 + 76
30 CoreFoundation 0x00007fff23bd3b74 __CFRunLoopDoSources0 + 180
31 CoreFoundation 0x00007fff23bce87f __CFRunLoopRun + 1263
32 CoreFoundation 0x00007fff23bce066 CFRunLoopRunSpecific + 438
33 GraphicsServices 0x00007fff384c0bb0 GSEventRunModal + 65
34 UIKitCore 0x00007fff48092d4d UIApplicationMain + 1621
35 ****** 0x000000010b51505f main + 143
36 libdyld.dylib 0x00007fff5227ec25 start + 1
37 ??? 0x0000000000000001 0x0 + 1
)

Hi, guys

My X axis is SCICategoryDateTimeAxis type.

And i have a huge amount of data to display. So i need to display it by scrolling of the chart surface.
So what is the best practice to update data series on the fly and display it at the chart surface?

Best regards,
Sushynski Andrei

Hi all,

Why the API’s for iOS, Android and WPF are not identically?
I have seen many samples on the forum, but to adapt it to a different platform is very hard.
A lot of classes are different for each platform.

• Is there any “comparison” for the different platforms?
• Is this planned to unify the API’s?

Regards
Urs

Hi, guys

I’m very sad because of you.

On my chart i’m added SCIZoomPanModifier with clip mode SCIClipMode_ClipAtExtents. And it well worked before i have updated lib to ‘2.0.1.1748’. Now it’s works the same way as SCIClipMode_StretchAtExtents. But i don’t want to zoom by scrolling at the edge of data.

Can you look at it and fix as soon as possible?

Best regards,
Sushynski Andrei

I am creating point data series using SCIXyScatterRenderableSeries.
I need to tap on specific data points and display pop over or some view on top of it. Pop over provides information regarding that point.

How can I implement that in iOS.

I am using sci charts to show live graphs of some devices. While displaying a graph on IPhone X or iPhone 6s it sometimes lags and lines started overlapping. It’s working fine on devices iPhone XSMax, iPhone 11. I have attached a 3 screenshots. Once when graph starts lagging, 2nd when graph is in middle, 3 when graph completes. please have a look. It starts lagging and overlapping lines when a new graph starts and when it ends it shows a complete graph shown and then again same issue repeats. It also started working correctly after some time. I need information about this issue. How to fix it and why it’s happening like this…

Hi, guys

Is Stacked Columns support autoRange by visible range?

I’m interesting in because sometimes my data looks like at the screenshot “huge_data.png”

And even when i have scrolled outside this data it’s looks like at the screenshot “scrolled_outside.png”

Best regards,
Sushynski Andrei

I had recently integrated SciChart into my app, and faced some problems with chat appearance on trial mode which are described here: https://www.scichart.com/questions/ios/issue-with-scichart-on-ios-simulator
Due to this problems I tried to run my app on an actual device, and got this build error from Xcode:

”’
ld: building for iOS, but linking in dylib file (/Users/ruslansabirov/Library/Developer/Xcode/DerivedData/exinity-aupulhpegzsnlfcrnqfiwnvnljpj/Build/Products/Debug-iphoneos/SciChart.framework/SciChart) built for iOS Simulator, file ‘/Users/ruslansabirov/Library/Developer/Xcode/DerivedData/exinity-aupulhpegzsnlfcrnqfiwnvnljpj/Build/Products/Debug-iphoneos/SciChart.framework/SciChart’ for architecture arm64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
”’
How can I fix this problem?

Hi, guys

Please take look at:
http://prntscr.com/gmmib5

So my question is

Is there a way to highlight a line of a gridlines to which the label belong? It can be a color changed or something similar that can be easily perceived by the user.

Best regards,
Sushynski Andrei

Hey all,

is there a way on iOS to export a SciChartSurface to a vector format in order to embed the exported chart into a PDF document? Right now the only thing I can find in the Documentation is exportToUIImage(). If not – any ideas for a workaround until such feature is implemented?

I am planning to have a graph like in attached image. Just to have only X values and additional Label provider on it and an indication to point the value like black arrow.
Need your inputs. Thanks in advance.

Hi,

Please take a look at the attached screenshot first.

I have a chart configured to draw some data. I need to draw SCIAxisMarkerAnnotation on Y axis. And it seems that annotation has alignment by right side of axis area. Is there a possibility to change it to left side of axis area?

Hello, I’m trailing your library right now. I’m wondering how to change the background color of the legend box. The document page for LegendModifier shows coming soon. I don’t see such option in LegendModifier definition in Xcode either. Thanks

Hi, guys

My axis is SCICategoryDateTimeAxis type. And using SCIZoomPanModifier (SCIClipMode_ClipAtExtents) to scroll chart

I’m using setVisibleRangeLimit: method to clip the axis during ZoomExtents

Until v. 2.0.0.1511 it’s work like a charm. But now something had have broken. And it’s doesn’t allow me to scroll chart at right way. It show me all of the data range on chart or only left side.

So can you fix it?

Best regards,
Sushynski Andrei

Hi guys,

I have some troubles with piecharts in swift. I want to provide custom labels outside of the piecharts segments. I found a screenshot of a nested piechart attached to an issue in your issue tracker. Thats what I want to do in swift, but I couldn’t find out a way to do so. Could you please provide an example code?

Thanks a lot in advance!
Alex

Hello,

The problem is how to sign the X-axis (the time axis).
How can I change the date and time format on the x axis?
Is this possible when I use the SCICategoryDateTimeAxis?
We use the code from example to set the time format

Hi,

I’m trying to limit the x-axis panning up to an annotation that I’ve drawn on the graph. This annotation can be beyond the current data’s position (i.e. data’s timestamp is at 5/4/2017 11:00:00, annotation’s position is at 5/4/2017 16:00:00). Is there a method, or any way that I can use to limit the x-axis panning up to the annotation’s position instead of limiting it to the data series’ max X?

Regards.