Tag: ios

Hi, guys

Is Stacked Columns support autoRange by visible range?

I’m interesting in because sometimes my data looks like at the screenshot “huge_data.png”

And even when i have scrolled outside this data it’s looks like at the screenshot “scrolled_outside.png”

Best regards,
Sushynski Andrei

Hello,

The problem is how to sign the X-axis (the time axis).
How can I change the date and time format on the x axis?
Is this possible when I use the SCICategoryDateTimeAxis?
We use the code from example to set the time format

Hi there.

It’s has been asked here:
https://www.scichart.com/questions/question/custom-annotation

So, Is it possible to draw dashed line annotation at the current version 1.2.3.982?

Best regards,
Sushynski Andrei

Hi, guys

My axis is SCICategoryDateTimeAxis type. And using SCIZoomPanModifier (SCIClipMode_ClipAtExtents) to scroll chart

I’m using setVisibleRangeLimit: method to clip the axis during ZoomExtents

Until v. 2.0.0.1511 it’s work like a charm. But now something had have broken. And it’s doesn’t allow me to scroll chart at right way. It show me all of the data range on chart or only left side.

So can you fix it?

Best regards,
Sushynski Andrei

Hi guys,

I have some troubles with piecharts in swift. I want to provide custom labels outside of the piecharts segments. I found a screenshot of a nested piechart attached to an issue in your issue tracker. Thats what I want to do in swift, but I couldn’t find out a way to do so. Could you please provide an example code?

Thanks a lot in advance!
Alex

I am using sci charts to show live graphs of some devices. While displaying a graph on IPhone X or iPhone 6s it sometimes lags and lines started overlapping. It’s working fine on devices iPhone XSMax, iPhone 11. I have attached a 3 screenshots. Once when graph starts lagging, 2nd when graph is in middle, 3 when graph completes. please have a look. It starts lagging and overlapping lines when a new graph starts and when it ends it shows a complete graph shown and then again same issue repeats. It also started working correctly after some time. I need information about this issue. How to fix it and why it’s happening like this…

I need someone to develop this chart for me and I will provide a JSON, for the data.

https://www.youtube.com/watch?v=t29Zl-7QyMw&t=215s
Please go to time line 3:22

I have been struggling in the documentation and if someone can create this chart for me, I will be more than happy to pay you.

The chart would have to be created for Swift 4 please.

Robert

Hi, guys

My x axis is SCICategoryDateTimeAxis and i’m want to draw grid line with custom period. Let’s say every four hours for data with a period of thirty minutes. What is the best way for that?

Can i redifined axis’s tickCoordinatesProvider?
Can you provide some example?
Or it only possible with axes annotations ?

Best regards,
Sushynski Andrei

Hi, guys

I’m working with SCIDateTimeAxis type of the X-axis. So my question Is there possibility of skipping non-value period?

Best regards,
Sushynski Andrei

I am planning to have a graph like in attached image. Just to have only X values and additional Label provider on it and an indication to point the value like black arrow.
Need your inputs. Thanks in advance.

Hi,

I am using SciChart_iOS_SDK_3.0.0.5074 with Swift 5.

I want to show string type on X-axis. I am using below code snippet.

class YearsLabelProvider: SCILabelProviderBase<SCINumericAxis> {

   var xLabels: [String] = ["Test", "Test", "Test", "Test", "Test", "Test", "Test", "Test",     "Test", "Test", "Test", "Test", "Test", "Test"]

   func update(_ axis: ISCIAxisCore!) { }

   override func formatLabel(_ dataValue: ISCIComparable!) -> ISCIString! {
        let index = Int(dataValue.toDouble())
        return NSString(string: index >= 0 && index < xLabels.count ? xLabels[index] : "")
    }

    override func formatCursorLabel(_ dataValue: ISCIComparable!) -> ISCIString! {
        let index = Int(dataValue.toDouble())

        var result: String?

        if (index >= 0 && index < xLabels.count) {
            result = xLabels[index]
        }
        return NSString(string: result!)
    }
}

Application crashes while loading with the following error –

” *** Terminating app due to uncaught exception ‘Initializer not allowed Exception’, reason: ‘Parameterless initializer of Chart.YearsLabelProvider class shouldn’t be used. Please use one of the designated initializers instead'”

Kindly help us resolving this issue since this is a showstopper issue.
I would also like to know about what data SCIXyDataSeries accepts when we are working with strings.

I would like to change the color of chart legend, but have failed to find information on how can I do this for iOS. Any sort of tutorial would be highly appreciated.

Worst case scenario would be to create a custom theme that is based on Bright Spark theme and update legend parameters there, but for this I would need to know what exactly does Bright Spark theme looks like.

Looking forward to any recommendations.

Best Regards,
Paul.

Hi,

I’m trying to limit the x-axis panning up to an annotation that I’ve drawn on the graph. This annotation can be beyond the current data’s position (i.e. data’s timestamp is at 5/4/2017 11:00:00, annotation’s position is at 5/4/2017 16:00:00). Is there a method, or any way that I can use to limit the x-axis panning up to the annotation’s position instead of limiting it to the data series’ max X?

Regards.

Hi.
I’m in process optimizing my app.
I’m using Objective-c.

I’d found some memory leaking issues and successfully fixed some of that.

A first issue was about ‘renderableSeries’ under ‘SCIChartSurfaceView’.
If you set class of UIView as ‘SCIChartSurfaceView’ in interface builder and make outlet without setting ‘strong’ or ‘weak’ in .m file,
It never get released automatically and will stay retained on memory.
For me, it caused about 90MB of memory leaking.
But I could solve this issue manually by putting -(void)clear; method of renderableSeries in viewWillDisappear method.

Another issue is about ‘SCIDateTimeDeltaCalculator’ and ‘SCINumericDeltaCalculator’.
It causes about 50MB of memory leaking.
But problem is, I couldn’t find neither where it’s been called nor how I release this manually.

I will be waiting for your answer.

Thanks.

+)
(lldb) po SciChartVersionNumber
0x3ff0000000000000

(lldb) po SciChartVersionString
0x474f525029232840

I wanted to know what version I’m using.. but i couldn’t know… what version am i using..?

Hello, I’ve been trying to create a SCIUniformHeatMap, but I only get a blank, black screen.
Can anyone recommend why colors and the graph aren’t showing up? Thanks

var ecmSurface: SCIChartSurface = SCIChartSurface()
var ecmDataSeries = SCIUniformHeatmapDataSeries(xType: .double, yType: .double, zType: .double, xSize: ReviewModeData.MATRIX_COLUMNS, ySize:ReviewModeData.MATRIX_ROWS)
var heatmapRenderableSeries: SCIFastUniformHeatmapRenderableSeries = SCIFastUniformHeatmapRenderableSeries()
private let countColors = 6
private var colorRGBArray: [UIColor] = [
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 131.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 255.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 255.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 128.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1)
]
for i in 0..<ReviewModeData.MATRIX_COLUMNS {
for j in 0 ..< ReviewModeData.MATRIX_ROWS {
ecmDataSeries.update(z: ecm2DMatrix[i][j], atX: i, y: j)
}
}
var colorZValueArray: [Double] = determineColorMapValues(clim1: 0, clim2: 1);
var colorMap = SCIColorMap(colors: colorRGBArray, andStops: colorZValueArray as [NSNumber])

//configure ECM heatmap
heatmapRenderableSeries.minimum = ReviewModeData.ECM_CLIM1
heatmapRenderableSeries.maximum = ReviewModeData.ECM_CLIM2
heatmapRenderableSeries.dataSeries = ecmDataSeries
heatmapRenderableSeries.colorMap = colorMap!

Hi, guys

Please take look at:
http://prntscr.com/gmmib5

So my question is

Is there a way to highlight a line of a gridlines to which the label belong? It can be a color changed or something similar that can be easily perceived by the user.

Best regards,
Sushynski Andrei

Hi Guys,

I am not able to figure out solution for handling NAN values in iOS which is available in Android in case of FastLineRenderableSeries.

Thanks

I’m trying to make a chart with a “toggle function”.

The “toggle function” what i wanted to make is this.

1. enter to UIViewController which Chart is in it
2. before singleTap on a chart, a chart has zoomPanModifier, XAxisDragModifier,, etc
3. after make singleTap on the chart, that chart has only CursorModifier.
4. CursorModifier’s UI stays on chart without disappearing and i can move crossed line to specific point i want (just like what CursorModifier originally does)
5. another single tap on chart would make a chart to have all other modifiers but CursorModifer.

–

What I have made successfully was 1,2,3,5 . not 4.

The way i was going to solve this problem was make fake touch event on Chart view and
snatch UIGestureRecognizer Event and let ChartView think they’re being touched till I give stop signal

But I heard that there is no more way to pass fake touch to UIView.

So I’m feeling difficulty on this problem…..

is there any easy way to solve this problem?

–

TL;DR;

I WANT TO MAKE CURSORMODIFIER’ UI STAYS ON A CHART!

+)
(lldb) po SciChartVersionNumber
0x3ff0000000000000

(lldb) po SciChartVersionString
0x474f525029232840

I wanted to know what version I’m using.. but i couldn’t know… what version am i using..?

Hey Guys,

I have a requirement where I need to show Donut Chart Title , but adding any annotation is crashing my application.

    let textAnnotation = SCITextAnnotation()
    textAnnotation.coordinateMode = .relative
    textAnnotation.x1 = SCIGeneric(0.5)
    textAnnotation.y1 = SCIGeneric(0.5)
    textAnnotation.horizontalAnchorPoint = .center
    textAnnotation.verticalAnchorPoint = .center
    textAnnotation.text = "Test"
    textAnnotation.style.textStyle.fontSize = 14
    textAnnotation.style.textColor = UIColor.fromARGBColorCode(0xff000000);
    textAnnotation.style.backgroundColor = UIColor.clear
    chartSurface.annotations = SCIAnnotationCollection(childAnnotations: [textAnnotation])

Thanks

Hi, guys

I want to show two renderableSeries on one chart view. These series have common x-axis (SCICategoryDateTimeAxis) and separate y-axes(SCINumericAxis). Only one of y-axis is visible at chart view. Also the data series of visible renderable series updated by scrolling to left or to right. So for displaying on one view i’m using:

[y1Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.3) Max:SCIGeneric(0.07)]];
[y2Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.0) Max:SCIGeneric(5)]];

So it’s look good at start (Correct_zooming.png). But after some scrolling it decrease axis extents of invisible y-axis (decrease.png).
Or even breaks down (broken.png)

For test i’m using SCIFastOhlcRenderableSeries and SCIHorizontallyStackedColumnsCollection readerable series.
Data series for SCIHorizontallyStackedColumnsCollection is initializated like:

    [volumeSerie1 updateAt:index Y:SCIGeneric(100000 / [multiplier doubleValue])];
    [volumeSerie2 updateAt:index Y:SCIGeneric(500000 / [multiplier doubleValue])];

So can you look at it?
Or what way i should implement this behavior?

Best regards,
Sushynski Andrei

Hi all,

Why the API’s for iOS, Android and WPF are not identically?
I have seen many samples on the forum, but to adapt it to a different platform is very hard.
A lot of classes are different for each platform.

• Is there any “comparison” for the different platforms?
• Is this planned to unify the API’s?

Regards
Urs

Hi, guys

Is it possible to set min and max zoom constraints for renderable serie with one element ?
Default value (default_zoom.PNG) is too big.

Can you look at this?

Best regards,
Sushynski Andrei

How would I go about doing this in swift?

I would like to add scrollBar to SCINumericAxis for example xAxis.

I did find documentation:
https://www.scichart.com/documentation/v5.x/webframe.html#Scrollbars.html

But on iOS version, I can’t find numericAxis.Scrollbar is missing

Hi, guys

What is the minimum required sdk version for SciChart v.2?

Such as i have some trouble with IOS 9. See attachment.

Same behavior at real devices.

Can you look at this?

Best regards,
Sushynski Andrei

Hello!

I am building an iOS framework that sits on top of SciChart for app developers within our company. I’d like to provide my own default SCIThemeColorProvider object for charts in my framework. Easiest way to do that is to include my own theme plist in my framework’s bundle, but I cannot currently do that (as of 2.0.0.1643) because the SCIThemeColorProvider initializer assumes it’s either in the “Charting.SciChart” bundle or the main bundle.

I’d like to propose modifying SCIThemeColorProvider to add another initializer that takes a bundle ID, like this:

/**
 * Creates theme provider based on specified style
 *
 * @param themeKey The key of style which should be used as base for this theme provider
 *
 * @param bundleIdentifier The identifier of the bundle containing the theme plist identified by 
 *                         themeKey; if nil, the main bundle is used.
 */
- (nullable instancetype)initWithThemeKey:(nonnull NSString*)themeKey bundleIdentifier:(nullable NSString*)bundleIdentifier;

The existing -initWithThemeKey: initializer would call through to this initializer with a nil bundle ID.

I have attached a patch file with this proposed change. Could this be added to an upcoming build?

Is the styleFor function of SCIPaletteProvider that was in Version 2.0 not implemented in Version 4.8?
Also, are there any plans to implement it?

I am upgrading from SciCharts 2.0.1 to SciCharts 4.3.
When the color was set using SCI Palatt Provider in Version 2.0, the memory used was 200M, but in Version 4.3, the memory used may consume as much as 1G.
I tried to devise it by setting the Sampleing Mode, but it is not very effective.

SCI Charts is used to display the spectrum data of audio data while playing the sound.

Hi,

I’ve encountered an issue with the candlestick graph I’ve drawn that consists of a set of random X date time values – this causes the candlesticks have varying distances from one another.

Rendering the data from an initial set seems to be fine but as I run a NSTimer to add on more points, the body of the new candlesticks seem to be 0. (Note, the date time values are still random but have been made to be set after the last placed point)

In fact, the initial data points that I added see to be rendered ‘body-less’ if it’s within the same visible range as the newly added points. And if I pan along the newly added points, the bodies of some data points will appear at random visible ranges.

Is this a normal behaviour or should I take anything else into consideration?

Here are a couple of my configurations which I think may have affected anything:
1. My XAxis has set its visible range limit mode to ClipMode_Min
2. Candlestick series style data body width is set to be default.
3. I have a the following modifiers set up.

self.xDragModifier = [SCIXAxisDragModifier new];
self.xDragModifier.axisId = @"xAxis";
self.xDragModifier.dragMode = SCIAxisDragMode_Pan;
self.xDragModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
[self.xDragModifier setModifierName:@"XAxis DragModifier"];

self.pinchZoomModifier = [[SCIPinchZoomModifier alloc] init];
[self.pinchZoomModifier setModifierName:@"PinchZoom Modifier"];
self.pinchZoomModifier.xyDirection = SCIXYDirection_XDirection;

self.zoomPanModifier = [SCIZoomPanModifier new];
self.zoomPanModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
self.zoomPanModifier.xyDirection = SCIXYDirection_XDirection;
[self.zoomPanModifier setModifierName:@"ZoomPan Modifier"];

SCIModifierGroup * gm = [[SCIModifierGroup alloc] initWithChildModifiers:@[self.xDragModifier, self.pinchZoomModifier, self.zoomPanModifier]];
self.chartSurface.chartModifier = gm;

The points are drawing just fine, but the body of the candlestick is not appearing as expected.

Thanks in advance.

I’m trying to add annotations on a chart but they are rendering above my legend.

Initially (similar to most of the demo code I’ve seen), I setup my modifiers, then created my series and animated them in — then added my annotations (adding to annotationGroup). This created a timeline of blank chart surface with legend (good so far), annotations popping in before the chart series animated in (weird / not good) and on TOP of the legend (really bad), then the animation of the series after that.

I’ve tried about everything I can think of and the best I’ve been able to do is use a completion block of the animation rendering the series — and moved my chart modifiers (and legend) into that completion block. If I put the annotations in the completion block, they will render after the chart modifier and I have the same problem (even if placed after the chart modifiers). I have to set the annotations before the animation, and then the chart modifier in the completion block will work and the legend will be above the . Of course, this is a bit odd too — as first my annotations pop up by themselves on the blank surface, followed by my series animating in, then at the end of the 2 second animation, the legend just pops in.

I really would like my legend to be rendered first on the blank surface and the annotations and chart series to animate in together under my legend. I’m gathering that’s unlikely (at least the animation part) — but is there anyway I can place my legend first and still have the annotations go under it? It feels like the layers should be: modifiers > annotations > rendered series. I also I’ve read this order before in some WPF docs I believe, but doesn’t seem to be respected on iOS?

UPDATE: My current work around isn’t sufficient because I really need access to the renderable series to create the annotations which means I really can’t defer my chart modifiers (i.e. legend) until after the annotations. Additionally, if I need to update (remove / re-add) an annotation due to a series being deactivated in the legend, now my annotations are on top of the legend again.

Good day! I have download this zip archive SciChart_iOS_SDK_4.2.0.5533.zip, on my laptop. Opened it and can not find the file SciChart.xcframework, according description from this article. I need to add library to Xcode frameworks, but I can not do it. Please can you tell me where can I get this file.

I try to make a text formatting for my chart on IOS and Android, regarding your documentation:

IOS:
https://www.scichart.com/documentation/ios/current/axis-labels—textformatting-and-cursortextformatting.html
yAxis.textFormatting = “$0.0”

Android:
https://www.scichart.com/documentation/android/current/Axis%20Labels%20-%20TextFormatting%20and%20CursorTextFormatting.html
yAxis.setTextFormatting(“$0.0000”);

I checked my code and its the same like yours. On Android i have:

// yAxis filed with type IAxis
private IAxis yAxis;

// create
yAxis = sciChartBuilder
.newNumericAxis()
.withGrowBy(0.01d, 0.1d)
.withDrawLabels(true)
.withDrawMajorGridLines(true)
.withDrawMinorGridLines(false)
.withDrawMajorBands(false)
.withDrawMajorTicks(false)
.build();

// the set textFormatting:
yAxis.setTextFormatting(“$0.0000”);

On IOS i have:

var yAxis: SCINumericAxis?
self.yAxis = SCINumericAxis()
self.yAxis?.textFormatting = “$0.0”

But it is not working, can you tell me please why? What I’m doing wrong?

Hi guys,

Is it possible to capture the tap event when we tap on a point marker or a data point? I can see there’s a DataPointSelectionModifier for WPF, but there’s nothing for iOS. Our goal is to show a popup (tooltip) on the point marker when the user taps on it.

Thanks,
Lazar Nikolov

Hello, I’m trailing your library right now. I would like to be able to move the graph around as well as a cursor on the graph. So I enabled both SCIZoomPanModifier and SCICursorModifier. But since both use one finger panning, the result wasn’t that good. Do you have any guidance for solving the conflict and letting them working together? I’m thinking to do it in the following way: if the touch location is within certain pixel range of the cursor, panning action will move the cursor, otherwise it moves the graph. Is it possible? Thanks

Currently we have two graph surfaces with two Y axes on each side and we need all of the Y axes to have fixed width size. Until now we were achieving that like this:
topGraphSurface.LeftAxisAreaForcedSize = 45;
topGraphSurface.RightAxisAreaForcedSize = 45;
bottomGraphSurface.LeftAxisAreaForcedSize = 45;
bottomGraphSurface.RightAxisAreaForcedSize = 45;

but since updating to the new SciChart v3 we get the error “SciChartSurface does not contain a definition for (Left)AxisAreaForcedSize”. I couldn’t find any information about this in the Migration guide, so is there a way to achieve this in the new version?