Tag: ios

Hi Guys,

I am not able to figure out solution for handling NAN values in iOS which is available in Android in case of FastLineRenderableSeries.

Thanks

Hi,

I’ve encountered an issue with the candlestick graph I’ve drawn that consists of a set of random X date time values – this causes the candlesticks have varying distances from one another.

Rendering the data from an initial set seems to be fine but as I run a NSTimer to add on more points, the body of the new candlesticks seem to be 0. (Note, the date time values are still random but have been made to be set after the last placed point)

In fact, the initial data points that I added see to be rendered ‘body-less’ if it’s within the same visible range as the newly added points. And if I pan along the newly added points, the bodies of some data points will appear at random visible ranges.

Is this a normal behaviour or should I take anything else into consideration?

Here are a couple of my configurations which I think may have affected anything:
1. My XAxis has set its visible range limit mode to ClipMode_Min
2. Candlestick series style data body width is set to be default.
3. I have a the following modifiers set up.

self.xDragModifier = [SCIXAxisDragModifier new];
self.xDragModifier.axisId = @"xAxis";
self.xDragModifier.dragMode = SCIAxisDragMode_Pan;
self.xDragModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
[self.xDragModifier setModifierName:@"XAxis DragModifier"];

self.pinchZoomModifier = [[SCIPinchZoomModifier alloc] init];
[self.pinchZoomModifier setModifierName:@"PinchZoom Modifier"];
self.pinchZoomModifier.xyDirection = SCIXYDirection_XDirection;

self.zoomPanModifier = [SCIZoomPanModifier new];
self.zoomPanModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
self.zoomPanModifier.xyDirection = SCIXYDirection_XDirection;
[self.zoomPanModifier setModifierName:@"ZoomPan Modifier"];

SCIModifierGroup * gm = [[SCIModifierGroup alloc] initWithChildModifiers:@[self.xDragModifier, self.pinchZoomModifier, self.zoomPanModifier]];
self.chartSurface.chartModifier = gm;

The points are drawing just fine, but the body of the candlestick is not appearing as expected.

Thanks in advance.

I’m trying to make a chart with a “toggle function”.

The “toggle function” what i wanted to make is this.

1. enter to UIViewController which Chart is in it
2. before singleTap on a chart, a chart has zoomPanModifier, XAxisDragModifier,, etc
3. after make singleTap on the chart, that chart has only CursorModifier.
4. CursorModifier’s UI stays on chart without disappearing and i can move crossed line to specific point i want (just like what CursorModifier originally does)
5. another single tap on chart would make a chart to have all other modifiers but CursorModifer.

–

What I have made successfully was 1,2,3,5 . not 4.

The way i was going to solve this problem was make fake touch event on Chart view and
snatch UIGestureRecognizer Event and let ChartView think they’re being touched till I give stop signal

But I heard that there is no more way to pass fake touch to UIView.

So I’m feeling difficulty on this problem…..

is there any easy way to solve this problem?

–

TL;DR;

I WANT TO MAKE CURSORMODIFIER’ UI STAYS ON A CHART!

+)
(lldb) po SciChartVersionNumber
0x3ff0000000000000

(lldb) po SciChartVersionString
0x474f525029232840

I wanted to know what version I’m using.. but i couldn’t know… what version am i using..?

Hi, guys

Is it possible to draw axis line at axis area? See attachment.

When search this forum, I found that we can achieve it by adding point marker. But I am getting this error when trying to add point marker :
‘Operation: setPointMarker: is not avaliable on type: SCIHorizontallyStackedColumnsCollection’

let me know this feature(round top corners of bars) is availble or not ! Or is there any way to do this ?

Hi, guys

My x axis is SCICategoryDateTimeAxis and i’m want to draw grid line with custom period. Let’s say every four hours for data with a period of thirty minutes. What is the best way for that?

Can i redifined axis’s tickCoordinatesProvider?
Can you provide some example?
Or it only possible with axes annotations ?

Best regards,
Sushynski Andrei

Good day! I have download this zip archive SciChart_iOS_SDK_4.2.0.5533.zip, on my laptop. Opened it and can not find the file SciChart.xcframework, according description from this article. I need to add library to Xcode frameworks, but I can not do it. Please can you tell me where can I get this file.

Hi

I am developing a Xamarin iOS application and I’m using a SCIPieChartSurface. I can create the chart and set its values, but it is not possible to auto-update the donut with new data.
I am trying to update the value by doing:

myDonut.MyPieSegment.Value = newValue;

But nothing happends…

I would like to add scrollBar to SCINumericAxis for example xAxis.

I did find documentation:
https://www.scichart.com/documentation/v5.x/webframe.html#Scrollbars.html

But on iOS version, I can’t find numericAxis.Scrollbar is missing

Good day!
I need to determine the value of the visible graph y from the x value and the problem is that I can’t calculate the y value outside of the data I’m rendering
example data:
[
{ x:1, y: 10 },
{ x:5, y: -5 },
{ x: 9, y: 15}
]

I use SCISplineMountainRenderableSeries and I need to show the intersection of the graph at point 3.5
I need a point but I have only one coordinate value

how can i get this y value?

Hi, guys

My X axis is SCICategoryDateTimeAxis type.

And i have a huge amount of data to display. So i need to display it by scrolling of the chart surface.
So what is the best practice to update data series on the fly and display it at the chart surface?

Best regards,
Sushynski Andrei

Hi guys,

Is it possible to capture the tap event when we tap on a point marker or a data point? I can see there’s a DataPointSelectionModifier for WPF, but there’s nothing for iOS. Our goal is to show a popup (tooltip) on the point marker when the user taps on it.

Thanks,
Lazar Nikolov

Hello, I’ve been trying to create a SCIUniformHeatMap, but I only get a blank, black screen.
Can anyone recommend why colors and the graph aren’t showing up? Thanks

var ecmSurface: SCIChartSurface = SCIChartSurface()
var ecmDataSeries = SCIUniformHeatmapDataSeries(xType: .double, yType: .double, zType: .double, xSize: ReviewModeData.MATRIX_COLUMNS, ySize:ReviewModeData.MATRIX_ROWS)
var heatmapRenderableSeries: SCIFastUniformHeatmapRenderableSeries = SCIFastUniformHeatmapRenderableSeries()
private let countColors = 6
private var colorRGBArray: [UIColor] = [
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 131.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 0.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 0.0/255.0, green: 255.0/255.0, blue: 255.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 255.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 255.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1),
UIColor(red: 128.0/255.0, green: 0.0/255.0, blue: 0.0/255.0, alpha: 1)
]
for i in 0..<ReviewModeData.MATRIX_COLUMNS {
for j in 0 ..< ReviewModeData.MATRIX_ROWS {
ecmDataSeries.update(z: ecm2DMatrix[i][j], atX: i, y: j)
}
}
var colorZValueArray: [Double] = determineColorMapValues(clim1: 0, clim2: 1);
var colorMap = SCIColorMap(colors: colorRGBArray, andStops: colorZValueArray as [NSNumber])

//configure ECM heatmap
heatmapRenderableSeries.minimum = ReviewModeData.ECM_CLIM1
heatmapRenderableSeries.maximum = ReviewModeData.ECM_CLIM2
heatmapRenderableSeries.dataSeries = ecmDataSeries
heatmapRenderableSeries.colorMap = colorMap!

Hello!

I am building an iOS framework that sits on top of SciChart for app developers within our company. I’d like to provide my own default SCIThemeColorProvider object for charts in my framework. Easiest way to do that is to include my own theme plist in my framework’s bundle, but I cannot currently do that (as of 2.0.0.1643) because the SCIThemeColorProvider initializer assumes it’s either in the “Charting.SciChart” bundle or the main bundle.

I’d like to propose modifying SCIThemeColorProvider to add another initializer that takes a bundle ID, like this:

/**
 * Creates theme provider based on specified style
 *
 * @param themeKey The key of style which should be used as base for this theme provider
 *
 * @param bundleIdentifier The identifier of the bundle containing the theme plist identified by 
 *                         themeKey; if nil, the main bundle is used.
 */
- (nullable instancetype)initWithThemeKey:(nonnull NSString*)themeKey bundleIdentifier:(nullable NSString*)bundleIdentifier;

The existing -initWithThemeKey: initializer would call through to this initializer with a nil bundle ID.

I have attached a patch file with this proposed change. Could this be added to an upcoming build?

Hey again!

Is there kind of a delegate that notify me if the user uses the crosshair/SCIRolloverModifier?
I want to know which value he is inspecting to show him further information outside the chart for this datapoint.

Thanks and Greeting
Benedikt

Good day guys. I have download SciChart_iOS_SDK_4.2.0.5533 on Macbook M1. And try to integrate ios-arm64_armv7 verions to my project. I have added SciChart.xcframework to frameworks in Xcode 12.4. But the build is failed with a few errors:

1. unable to load standard library for target arm-64-apple-ios9.0
2. Failed to build module ‘SciChart’ from its module interface, it may have been damaged or it may have triggered a bug in Swift compiler when it was produced.

Can you tell me please did I use the right version of SciChart.xcframework for apple silicone? And how to solve this errors?

I cannot get SCILinearGradientBrushStyle working on a donut chart. Only radial gradients work

Here is my code sample:

let segment = SCIPieSegment()
segment.fillStyle = SCILinearGradientBrushStyle(colorCodeStart: 0xff007aff, finish: 0x4D007aff, direction: .horizontal)
segment.value = 100.0
segment.title = "Segment"
donutSeries.segments.add(segment)

The segment just renders a flat color

Is the styleFor function of SCIPaletteProvider that was in Version 2.0 not implemented in Version 4.8?
Also, are there any plans to implement it?

I am upgrading from SciCharts 2.0.1 to SciCharts 4.3.
When the color was set using SCI Palatt Provider in Version 2.0, the memory used was 200M, but in Version 4.3, the memory used may consume as much as 1G.
I tried to devise it by setting the Sampleing Mode, but it is not very effective.

SCI Charts is used to display the spectrum data of audio data while playing the sound.

Hi, guys

Is Stacked Columns support autoRange by visible range?

I’m interesting in because sometimes my data looks like at the screenshot “huge_data.png”

And even when i have scrolled outside this data it’s looks like at the screenshot “scrolled_outside.png”

Best regards,
Sushynski Andrei

Hi, guys

I’m very sad because of you.

On my chart i’m added SCIZoomPanModifier with clip mode SCIClipMode_ClipAtExtents. And it well worked before i have updated lib to ‘2.0.1.1748’. Now it’s works the same way as SCIClipMode_StretchAtExtents. But i don’t want to zoom by scrolling at the edge of data.

Can you look at it and fix as soon as possible?

Best regards,
Sushynski Andrei

We have lots of Point Markers in our series that overlap, so we’re trying to find a way to Cluster them in Android and iOS. I can see that there is an SCIPointMarkerClusterizer. Can you give us some pointers on how we can achieve point marker clustering and/or spacing?