SciChart® the market leader in Fast WPF Charts, WPF 3D Charts, iOS Chart, Android Chart and JavaScript Chart Components

2 votes
5k views

From your documentation:

4.9 Annotations

SciChart features a rich Annotations API, that allows you to place UIKit UIElements over the chart.
SciChat provides a number of built-in annotations, but you can also create your own.

SCIBoxAnnotation, SCILineAnnotation and SCITextAnnotation are cool, but sometimes it’s not enough.

Is it possible to render UIView on the chart (at least UIImage)?
Is it possible to draw dashed line annotation?
Could you provide an example of creating custom annotation class?

2 votes
2k views

I’m trying to create a spectrum viewer with your library. One important feature is a cursor supporting both automatic mode and manual mode. In automatic mode, it stays at the maximum value. In manual mode, it moves with finger panning. It’s close to the SCICursorModifier with the cross lines, but it should always stay on the plot even without touch. Also it should reside on real data points instead of anywhere in between like the SCIRolloverModifier instead of the SCICursorModifier.

Could you give me some advices about how to achieve it? Thanks.

EDIT: after reading more of your documents, I believe HorizontalLineAnnotation and VerticalLineAnnotation are the way to go. I have already added them as the automatic mode cursor. For the manual mode, I still need your help to achieve either:
1) a callback function for the VerticalLineAnnotation drag event, so that I could move both lines to the corresponding data point
or
2) a custom ZoomPanModifier to allow me to distinguish one point or two points touch: one point panning to move the whole plot and two points panning to determine the new cursor location and redraw the two annotations there

EDIT2: I was able to create a custom VerticalLineAnnotation class to handle the panning event. There is one more question left. Right now in order to update the verticallineannotation and horizontallineannotation on the graph, I remove them from sciChartSurface.annotations, change x/y locations and add them back. Is there a redraw or refresh or update function to call directly?

Thanks

  • Haoran Xie asked 2 years ago
  • last active 2 years ago
2 votes
4k views

Trying to install SciChart.iOS NuGet package for Xamarin.iOS project results the following error:

Package SciChart.iOS 2.0.1.527 is not compatible with xamarinios10 (Xamarin.iOS,Version=v1.0). Package SciChart.iOS 2.0.1.527 supports: xamarinios (xamarin-ios,Version=v0.0)

Wondering what the heck is “xamarin-ios,Version=v0.0”? It must be xamarinios10. We’re considering to buy SciChart but right now our build server is stuck on this error. As a workaround, we raname xamarin-ios to xamarinios10 in the lib directory but this not an option for a cloud build server.

  • rubs00 asked 3 years ago
  • last active 3 years ago
1 vote
3k views

When I embed my view controller in a navigation controller the top of the chart is hidden behind the navigation bar. So I went to the storyboard and found the view controller attributes section called “extend edges” and turned off the option called “under top bars”. This fixes the top of the chart. Now the bottom of the chart drops off the bottom of the screen. The x-axis is completely missing. Does SciChart support this case?

1 vote
401 views

Hi,

I’d like to update the iOS version to the latest stable one (4.1.0), but after following the steps here: https://www.scichart.com/documentation/ios/current/integrating-scichart-libraries.html
Xcode keeps complaining:

framework not found SciChart.xcframework
clang: error: linker command failed with exit code 1

If I downgrade back to 3.1.1 everything works again. Any idea why the version 4.1.0 is not working? I’m using Pods to manage all dependencies.

1 vote
5k views

Hello!

Please take a look at the attached screenshot first.

I have a chart configured to draw real-time trading data. X axis type is DateTime. Y axis type is Float. I need to draw vertical expiration time line.

I tried to draw coordinate relative line annotation as follows:

var date: NSDate = NSDate()

let lineAnnotation = SCILineAnnotation()
lineAnnotation.xAxisId = self.axisXId
lineAnnotation.yAxisId = self.axisYId
lineAnnotation.coordMode = .SCIAnnotationCoord_RelativeX
lineAnnotation.style.linePen = SCIPenSolid(color: Style.Chart.ExpirationDateLine.Color, width: Style.Chart.ExpirationDateLine.Width
lineAnnotation.xStart = SCI_constructGenericTypeWithInfo(&date, .DateTime)
lineAnnotation.xEnd = SCI_constructGenericTypeWithInfo(&date, .DateT            

self.chartSurface.annotation = lineAnnotation
self.chartSurface.invalidateElement()

I tried to play with different coordMode values. Line does not appear. Could you help me with this task?

1 vote
3k views

I’m having difficulty determining the easiest method of placing the legend outside of the chart surface in iOS. I’ve done a ton of trial and error and have run into several issues. I understand that the SCIChartLegend class is just a subclass of UICollectionView. The problem seems to be these two things:

— When adding a legend via SCILegendModifier it only allows for custom placement if using SCILegendModifier’s initializer which also requires you assign an SCILegendDataSource. Or at least that’s required for the initializer with the useAutoPlacement parameter that I can then set to false (not even sure if that would work once I got that far).

— Placing the SCIChartLegend view manually without first initializing an SCILegendModifier with it results in none of the legend cells being loaded. I would imagine this is due to a missing SCILegendDataSource.

It seems like these could be overcome if I could somehow construct a default instance of SCILegendDataSource. Unfortunately, SCILegendDataSource only exposes one initializer which requires I pass it a xib name for the legend items. But I do not want to customize the legend items- I simply want to be able to construct the default SCILegendDataSource because that is apparently required to get the SCIChartLegend working.

Am I making this more complicated than it needs to be? What’s the simplest path to placing the chart legend where I want in iOS?

  • Sean Young asked 2 years ago
  • last active 2 years ago
1 vote
1k views

We are using stacked bar chart, and showing only 6 bars visible at a time.
In the X-Axis, the month labels are missing for alternate months & only displays all month label as a flash when graph is being scrolled. Is there any way to fix this.

1 vote
988 views

Stacked Bar chat: If we give 0 values, there are Black lines showing at middle of screen. please see attached screen.

1 vote
6k views

I’ve got error message during compilation:

 ld: bitcode bundle could not be generated because '.../Frameworks/SciChart.framework/SciChart' was built without full bitcode. All frameworks and dylibs for bitcode must be generated from Xcode Archive or Install build for architecture armv7

I temporary disabled bitcode for target. Will you fix it in the next build?

1 vote
2k views

Can SciChart be used in UITableviewCell? Is it possible to use Software rendering on iOS?

The OpenGL/Metal charts are great, but I suspect Software rendering would be a better for displaying data in UITableViewCells. There are many mobile apps out there that use charts in tableviews and I’d love to be able to use SciChart here too.

1 vote
2k views

Hello

is there a way to set the padding (aka reduce the gap) between bars in a SCIFastColumnRenderableSeries?

I attach a screenshot of my current situation: I would like to have zero margin between columns.

I tried searching in the knowledge base but all the answers I found seem to refer to APIs not available in the iOS SDK

.

There is not such class method in the iOS SDK called SciChartSurface.Padding

Thanks for your help

1 vote
4k views

Hi,

I’m attempting to plot on a mountain graph with a DateTimeAxis for the x-axis and I noticed that the plotted time is inaccurate.

The data that am attempting to put in has the following NSDate value: 2017-01-06T10:09:25+0000
Correct me if am wrong, but I believe the time on the axis that ought to be displayed should follow the device’s system timezone? In my case, it is +0800, setting the time to be about 6:09:25 pm

However, the plotted time ends up showing the point to be plotted at 2:09:25 instead.

I’ve tested with a date formatter and it displays the time as it should (6:09:25 pm).
I don’t think I configured anything regarding the axis’s time format, and the insertion of data was done as below:

[self.mountainSeries appendX:SCIGeneric(m.timestamp) Y:SCIGeneric(m.mid)];
[self.chartSurface invalidateElement];

Also, to add on, if I were to extract the XMax value from the axis (in this case, is the timestamp as above), it returns me as such: 2017-01-06 18:09:25 +0000

Thank you.

1 vote
2k views

We’re trying to make multiple legends on the screen, for example, 1 for the left axis and its data series, 1 for the right axis and its data series. I can see it’s possible in the WPF documentation, but in the iOS documentation it says “Coming soon!”. Do we need to wait for a future release of the Xamarin.iOS library or is it possible somehow now?

By the way, I’m not a trial user. We’ve just purchased a license today.

Thanks,
Lazar Nikolov

1 vote
967 views

Hello, I’m having an issue when I put multiple surfaces in an iOS view. Only the one made first is shown and there is a black space in place of the other. I swapped the order of creation and now the other is visible instead. Does anyone know why this is happening or have suggestions for putting multiple surfaces in an iOS view? Thanks

1 vote
0 answers
69 views

Try to integrate new SciChart.xcframework 4.2.0 instead of SciChart.framework 2.0 to the project and build failed in Xcode 12.4 with the next errors:
RNSciCandlestickChart.swift:
1) 335th line: Editor placeholder in source file
dates.add(date!))
2) 549th line: Cannot convert value of type ‘Bundle.Type’ to expected argument type ‘Bundle’ SCIThemeManager.addTheme(byThemeKey: theme, from: Bundle)
3) 768th line: Method does not override any method from its superclass
override func internalHandleGesture(_ gestureRecognizer: UIGestureRecognizer)
AnnotationDragListener.swift:
1) 4th line: Cannot find type ‘SCIAnnotationDragListener’ in scope
class AnnotationDragListener: SCIAnnotationDragListener
RNSciLineChart.swift:
1) 475th line: Editor placeholder in source file
SCIThemeManager.addTheme(byThemeKey: theme, from: Bundle)
Can you tell me please can I launch SciChart.xcframework 4.2.0 in Xcode 12.4? Any how to solve this issues?

1 vote
1k views

Hi SciChart team,

there is a working example that implement a Polar Chart type for iOS?
I was unable to find anything in the documentation. Only for WPF platform.
If not, there is a plan to support this kind of chart in next release of the library?

Thanks for the help.

1 vote
3k views

We’d like to customize the look of our legends. We have 4 legends displaying different data, but right now the only thing we can change is the Theme. Is there any way to customize the legend items, like add some icons, change the point marker shape and size, change the check box icon etc…

P.S.: I’m not a trial user. We have an iOS, Android and WPF licenses purchased.

Project info:
Xamarin.iOS
SciChart.iOS 2.2.2.854

0 votes
2k views

Hi Guys,

I am not able to figure out solution for handling NAN values in iOS which is available in Android in case of FastLineRenderableSeries.

Thanks

-1 votes
2k views

Hello Team,

In Pie Chart with DonutSeries, the segment spacing seems to have no effect on graph.

donutSeries.segmentSpacing = 10

Thanks

0 votes
3k views

Hi, guys

Is it possible to set min and max zoom constraints for renderable serie with one element ?
Default value (default_zoom.PNG) is too big.

Can you look at this?

Best regards,
Sushynski Andrei

0 votes
2k views

Hi all,

Why the API’s for iOS, Android and WPF are not identically?
I have seen many samples on the forum, but to adapt it to a different platform is very hard.
A lot of classes are different for each platform.

  • Is there any “comparison” for the different platforms?
  • Is this planned to unify the API’s?

Regards
Urs

  • Urs Geser asked 2 years ago
  • last active 2 years ago
0 votes
566 views

Hello,
I’m trying to convert Android (Java) code to iOS (Swift), and I need to create a custom SCIZoomPanModifier. In the android code, onFling, onDown, and onDown were overridden, but I can’t seem to do that in iOS. How can I override onFling, onDown, and onUp in iOS to mimic the android code?

Thanks

0 votes
1k views

I am creating point data series using SCIXyScatterRenderableSeries.
I need to tap on specific data points and display pop over or some view on top of it. Pop over provides information regarding that point.

How can I implement that in iOS.

0 votes
4k views

Hi, guys

Is there possibility to show tooltip by simply changing switch at the settings?
Not by tapping at the chart area as it implemented now.

Best regards,
Sushynski Andrei

0 votes
2k views

Hello, I’m trailing your library right now. I would like to be able to move the graph around as well as a cursor on the graph. So I enabled both SCIZoomPanModifier and SCICursorModifier. But since both use one finger panning, the result wasn’t that good. Do you have any guidance for solving the conflict and letting them working together? I’m thinking to do it in the following way: if the touch location is within certain pixel range of the cursor, panning action will move the cursor, otherwise it moves the graph. Is it possible? Thanks

  • Haoran Xie asked 2 years ago
  • last active 2 years ago
0 votes
908 views

After upgraded SciChart to SciChart_iOS_SDK_3.0.0.5074, using rollover modifier on a SciChart surface which was embedded into a scroll view will crash the app. It crashed when user scroll horizontally on a SciChart surface inside a horizontal scrollable scrollview. It is the same with the vertically scrollable scrollview.

2020-03-09 10:14:15.489302+0800 ******[4835:62890] -[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500

2020-03-09 10:14:15.503967+0800 *******[4835:62890] *** Terminating app due to uncaught exception ‘NSInvalidArgumentException’, reason: ‘-[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500’
*** First throw call stack:
(
0 CoreFoundation 0x00007fff23c7127e exceptionPreprocess + 350
1 libobjc.A.dylib 0x00007fff513fbb20 objc_exception_throw + 48
2 CoreFoundation 0x00007fff23c91fd4 -[NSObject(NSObject) doesNotRecognizeSelector:] + 132
3 CoreFoundation 0x00007fff23c75c4c
forwarding + 1436
4 CoreFoundation 0x00007fff23c77f78 _CF_forwarding_prep_0 + 120
5 SciChart 0x000000011139aaba -[SCITouchModifierBase onEvent:] + 186
6 SciChart 0x000000011135dfd8 +[SCIEventManager raiseOnEvent:toTarget:isMaster:] + 267
7 SciChart 0x000000011132d03f __38-[SCIEventDispatcher p_SCI_commonInit]_block_invoke + 165
8 SciChart 0x000000011132d45d -[SCIEventDispatcher raiseOnEvent:withAction:] + 569
9 SciChart 0x000000011133fa94 -[SCIChartSurfaceBase p_SCI_onTouchEvent:] + 233
10 SciChart 0x000000011133f996 -[SCIChartSurfaceBase touchesCancelled:withEvent:] + 209
11 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
12 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
13 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
14 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
15 UIKitCore 0x00007fff480a4a43 __106-[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:]_block_invoke + 609
16 UIKitCore 0x00007fff480a429e -[UIApplication _cancelTouchesOrPresses:withEvent:includingGestures:notificationBlock:] + 1163
17 UIKitCore 0x00007fff480a47ac -[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:] + 158
18 UIKitCore 0x00007fff47c37f2f -[UIGestureEnvironment _cancelTouches:event:] + 707
19 UIKitCore 0x00007fff47c40115 -[UIGestureRecognizer _updateGestureForActiveEvents] + 1779
20 UIKitCore 0x00007fff47c31eda _UIGestureEnvironmentUpdate + 2706
21 UIKitCore 0x00007fff47c3140a -[UIGestureEnvironment _deliverEvent:toGestureRecognizers:usingBlock:] + 467
22 UIKitCore 0x00007fff47c3117f -[UIGestureEnvironment _updateForEvent:window:] + 200
23 UIKitCore 0x00007fff480d04b0 -[UIWindow sendEvent:] + 4574
24 UIKitCore 0x00007fff480ab53b -[UIApplication sendEvent:] + 356
25 UIKit 0x0000000114ad2bd4 -[UIApplicationAccessibility sendEvent:] + 85
26 UIKitCore 0x00007fff4812c71a __dispatchPreprocessedEventFromEventQueue + 6847
27 UIKitCore 0x00007fff4812f1e0 __handleEventQueueInternal + 5980
28 CoreFoundation 0x00007fff23bd4471 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION + 17
29 CoreFoundation 0x00007fff23bd439c __CFRunLoopDoSource0 + 76
30 CoreFoundation 0x00007fff23bd3b74 __CFRunLoopDoSources0 + 180
31 CoreFoundation 0x00007fff23bce87f __CFRunLoopRun + 1263
32 CoreFoundation 0x00007fff23bce066 CFRunLoopRunSpecific + 438
33 GraphicsServices 0x00007fff384c0bb0 GSEventRunModal + 65
34 UIKitCore 0x00007fff48092d4d UIApplicationMain + 1621
35 ****** 0x000000010b51505f main + 143
36 libdyld.dylib 0x00007fff5227ec25 start + 1
37 ??? 0x0000000000000001 0x0 + 1
)

  • Gary Chan asked 12 months ago
  • last active 12 months ago
0 votes
3k views

Hi, guys

What is the minimum required sdk version for SciChart v.2?

Such as i have some trouble with IOS 9. See attachment.

Same behavior at real devices.

Can you look at this?

Best regards,
Sushynski Andrei

0 votes
2k views

I’m try to generate a UIImage from a SCIChartSurface into a graphic context using the code below from a view that is not displayed on the screen. The image created is pure black, which indicates it did not draw. If I display the graph in a view on the devices screen, the graph draws correctly.

UIGraphicsBeginImageContextWithOptions(self.chart.bounds.size, NO, 0.0);
[self.chart drawViewHierarchyInRect:self.chart.bounds afterScreenUpdates:YES];
UIImage *chartImage = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();

Are there any special steps that are needed to draw into a graphic context?

0 votes
0 answers
3k views

I’ve been pouring through the documentation and examples and cannot find an example of this. Has anyone been able to accomplish this and willing to share an example? Thanks.

0 votes
1k views

Hey all,

is there a way on iOS to export a SciChartSurface to a vector format in order to embed the exported chart into a PDF document? Right now the only thing I can find in the Documentation is exportToUIImage(). If not – any ideas for a workaround until such feature is implemented?

0 votes
4k views

Hi there.

It’s has been asked here:
https://www.scichart.com/questions/question/custom-annotation

So, Is it possible to draw dashed line annotation at the current version 1.2.3.982?

Best regards,
Sushynski Andrei

0 votes
3k views

Hi, guys

Is it possible to use negative index for methods:

-(void) insertAt:(int)index X:(SCIGenericType)x Open:(SCIGenericType)open High:(SCIGenericType)high Low:(SCIGenericType)low Close:(SCIGenericType)close;

-(void) updateAt:(int)index Open:(SCIGenericType)open High:(SCIGenericType)high Low:(SCIGenericType)low Close:(SCIGenericType)close;

Can you give an answer?

Best regards,
Sushynski Andrei

0 votes
456 views

I had recently integrated SciChart into my app, and faced some problems with chat appearance on trial mode which are described here: https://www.scichart.com/questions/ios/issue-with-scichart-on-ios-simulator
Due to this problems I tried to run my app on an actual device, and got this build error from Xcode:

”’
ld: building for iOS, but linking in dylib file (/Users/ruslansabirov/Library/Developer/Xcode/DerivedData/exinity-aupulhpegzsnlfcrnqfiwnvnljpj/Build/Products/Debug-iphoneos/SciChart.framework/SciChart) built for iOS Simulator, file ‘/Users/ruslansabirov/Library/Developer/Xcode/DerivedData/exinity-aupulhpegzsnlfcrnqfiwnvnljpj/Build/Products/Debug-iphoneos/SciChart.framework/SciChart’ for architecture arm64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
”’
How can I fix this problem?

0 votes
0 answers
3k views

I have a chart that has Real Time updates. I would like to create a custom legend modifier to display the latest value in the legend as well as other information. Is it possible to do this and if so where can I find an example?

0 votes
1k views

Hello,

The problem is how to sign the X-axis (the time axis).
How can I change the date and time format on the x axis?
Is this possible when I use the SCICategoryDateTimeAxis?
We use the code from example to set the time format

0 votes
2k views

Hi, guys

My x axis is SCICategoryDateTimeAxis class type. And it’s limited by VisiableRangeLimit like:

[xAxis setVisibleRangeLimit:[[SCIDoubleRange alloc] initWithMin:SCIGeneric(firstItem – (lastItem – priorItem))
Max:SCIGeneric(lastItem + (lastItem – priorItem))]];

Also for scrolling my content inside chart:

SCIZoomPanModifier * zpm = [[SCIZoomPanModifier alloc] init];
[zpm setModifierName:@"PanZoom Modifier"];
[zpm setClipModeX:SCIZoomPanClipMode_ClipAtExtents];

Like a description SCIZoomPanClipMode_ClipAtExtents says:
“forces the panning operation to stop suddenly at the extents of the data” – but it’s not working constantly.
Sometimes it’s allow to scroll outside the range. Like on the attached image.

So my question is how to limit scrolling by min and max value?

Best regards,
Sushynski Andrei

0 votes
0 answers
2k views

I would like to format several lines differently while still scaling them all to the same YAxis. For example if one line needs to go out to 4 decimal places but then another does not need any decimal values at all i would like those formats to be represented in all of the tooltips with said formats.

0 votes
5k views

On device, there is an unwanted border line on the SCIChartSurface. Please refer to the screenshot.

I tried removing this by setting the border width and setting it’s colour as white as below
self.surface.view.layer.borderColor = [[UIColor whiteColor]CGColor];
self.surface.view.layer.borderWidth = 2.0f;
However, this does not set the border of the SCIChartSurface.

How do I remove this unwanted border line?

  • Chui asked 4 years ago
  • last active 3 years ago
0 votes
2k views

Hey Guys,

I have a requirement where I need to show Donut Chart Title , but adding any annotation is crashing my application.

    let textAnnotation = SCITextAnnotation()
    textAnnotation.coordinateMode = .relative
    textAnnotation.x1 = SCIGeneric(0.5)
    textAnnotation.y1 = SCIGeneric(0.5)
    textAnnotation.horizontalAnchorPoint = .center
    textAnnotation.verticalAnchorPoint = .center
    textAnnotation.text = "Test"
    textAnnotation.style.textStyle.fontSize = 14
    textAnnotation.style.textColor = UIColor.fromARGBColorCode(0xff000000);
    textAnnotation.style.backgroundColor = UIColor.clear
    chartSurface.annotations = SCIAnnotationCollection(childAnnotations: [textAnnotation])

Thanks

0 votes
370 views

Hi guys,

I have some troubles with piecharts in swift. I want to provide custom labels outside of the piecharts segments. I found a screenshot of a nested piechart attached to an issue in your issue tracker. Thats what I want to do in swift, but I couldn’t find out a way to do so. Could you please provide an example code?

Thanks a lot in advance!
Alex

0 votes
3k views

Hi

I am developing a Xamarin iOS application and I’m using a SCIPieChartSurface. I can create the chart and set its values, but is is not possible to auto-update the donut with new data.
I am trying to update the value by doing:

myDonut.MyPieSegment.Value = newValue;

But nothing happends…

I heard it was a bug in the API for Android a month ago, is this similar? Or am I doing something wrong?
Thanks in advance!

Best regards
Jonas

0 votes
2k views

Hello.

I am working on Xamarin Android project with C#. Since having a legend within the chart causes problems with too many axis’ (no scrolling is available thus selecting different series in a legend becomes unavailable) and having a legend outside of chart area, anywhere we desire, would be of a preference, is there a tutorial on how could I achieve such a thing? Our project needs this functionality for both Android and iOS.

Would be grateful if anyone could help out with this issue.

Thank you in advance!

  • pauzu asked 1 year ago
  • last active 1 year ago
0 votes
3k views

Hi, guys

I have some data series like:

[[SCIXyDataSeries alloc] initWithXType:SCIDataType_DateTime
                                 YType:SCIDataType_Double
                             SeriesType:SCITypeOfDataSeries_XCategory];

Also my Y axis is kind of class SCINumericAxis

So my question is

if i’m trying add value to the series

[volumeSerie appendX:SCIGeneric(bar.time) Y:SCIGeneric([bar.volume doubleValue])];

and my bar.volume is bigger than 2 147 483 648 (float limit as i’m know). It’s leads to a axis range crash. Like on the attached image.

So what should i use to handle huge values?
Like a billions and more

Best regards,
Sushynski Andrei

0 votes
2k views

The numeric axis in our app weirdly displays the range from -2000 until 8000, even if it has or hasn’t got data series appended to it. I tried setting the VisibleRange and VisibleRangeLimit when creating the axis, but still no results. Here’s a piece of the code:

new SCINumericAxis
{
   AxisAlignment = SCIAxisAlignment.Left,
   AxisId = "axis_id",
   TextFormatting = " 0%",
   VisibleRangeLimit = new SCIDoubleRange(-30, 100),
   VisibleRange = new SCIDoubleRange(-30, 100)
};

The Y values that we have are doubles, example:

[0]: 98.26171875
[1]: 0
[2]: NaN
[3]: 98.26171875
[4]: 0
[5]: NaN
[6]: 78.203125
[7]: NaN
[8]: 38.96484375
[9]: NaN
[10]: 98.28125
[11]: 0
[12]: NaN
[13]: 68.22265625
[14]: 0

So just by looking at the values, we should have a data range from 0 to 100, but I think somehow it messes up the conversion and ends up with ridiculously large numbers. I’m not doing any additional operations on the data, the printed data above is the data from the XyDataSeries. The Y type is Double, the YMin is 0, the YMax is 98, but still ends up drawing the values until 10000.

0 votes
918 views

If we set ClipMode.None we can pan infinitely to the uncharted space of left and right. this is fine.
But I want to do panning infinitely only to the left side. So I set ‘clipAtMax’. This is stop panning at right. But instead of panning infinity to the left, it is stretching the left part.
Any solution ?

0 votes
0 answers
3k views

Hi, guys

Is there possibility to show CursorModifier by simply changing switch state?

According to custom tooltip behaviour it is possible for SCITooltipModifier. And it’s work at v 2.0.0.xxxx

So can you provide a code with redefinitions of private Api methods for this situation?

UDP: What is the best practice to customize tooltip’s data view?

Best regards,
Sushynski Andrei

0 votes
121 views

Guys can you tell me please why I get this error after build on new `mac M1 chip and how to solve it:

error: unable to load standard library for target ‘arm64-apple-ios8.0’
/Users/nameuser/Projects/pojectname/ios/SciChart.framework/Modules/SciChart.swiftmodule/arm64.swiftinterface:1:1: error: failed to build module ‘SciChart’ from its module interface; the compiler that produced it, ‘Apple Swift version 5.1.3 (swiftlang-1100.0.282.1 clang-1100.0.33.15)’, may have used features that aren’t supported by this compiler, ‘Apple Swift version 5.3.2 (swiftlang-1200.0.45 clang-1200.0.32.28)’
// swift-interface-format-version: 1.0`

0 votes
4k views

Hi,

I’ve encountered an issue with the candlestick graph I’ve drawn that consists of a set of random X date time values – this causes the candlesticks have varying distances from one another.

Rendering the data from an initial set seems to be fine but as I run a NSTimer to add on more points, the body of the new candlesticks seem to be 0. (Note, the date time values are still random but have been made to be set after the last placed point)

In fact, the initial data points that I added see to be rendered ‘body-less’ if it’s within the same visible range as the newly added points. And if I pan along the newly added points, the bodies of some data points will appear at random visible ranges.

Is this a normal behaviour or should I take anything else into consideration?

Here are a couple of my configurations which I think may have affected anything:
1. My XAxis has set its visible range limit mode to ClipMode_Min
2. Candlestick series style data body width is set to be default.
3. I have a the following modifiers set up.

self.xDragModifier = [SCIXAxisDragModifier new];
self.xDragModifier.axisId = @"xAxis";
self.xDragModifier.dragMode = SCIAxisDragMode_Pan;
self.xDragModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
[self.xDragModifier setModifierName:@"XAxis DragModifier"];

self.pinchZoomModifier = [[SCIPinchZoomModifier alloc] init];
[self.pinchZoomModifier setModifierName:@"PinchZoom Modifier"];
self.pinchZoomModifier.xyDirection = SCIXYDirection_XDirection;

self.zoomPanModifier = [SCIZoomPanModifier new];
self.zoomPanModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
self.zoomPanModifier.xyDirection = SCIXYDirection_XDirection;
[self.zoomPanModifier setModifierName:@"ZoomPan Modifier"];

SCIModifierGroup * gm = [[SCIModifierGroup alloc] initWithChildModifiers:@[self.xDragModifier, self.pinchZoomModifier, self.zoomPanModifier]];
self.chartSurface.chartModifier = gm;

The points are drawing just fine, but the body of the candlestick is not appearing as expected.

Thanks in advance.

  • Elle Yeoh asked 4 years ago
  • last active 4 years ago
0 votes
3k views

I’m trying to make a chart with a “toggle function”.

The “toggle function” what i wanted to make is this.

  1. enter to UIViewController which Chart is in it
  2. before singleTap on a chart, a chart has zoomPanModifier, XAxisDragModifier,, etc
  3. after make singleTap on the chart, that chart has only CursorModifier.
  4. CursorModifier’s UI stays on chart without disappearing and i can move crossed line to specific point i want (just like what CursorModifier originally does)
  5. another single tap on chart would make a chart to have all other modifiers but CursorModifer.

What I have made successfully was 1,2,3,5 . not 4.

The way i was going to solve this problem was make fake touch event on Chart view and
snatch UIGestureRecognizer Event and let ChartView think they’re being touched till I give stop signal

But I heard that there is no more way to pass fake touch to UIView.

So I’m feeling difficulty on this problem…..

is there any easy way to solve this problem?

TL;DR;

I WANT TO MAKE CURSORMODIFIER’ UI STAYS ON A CHART!

+)
(lldb) po SciChartVersionNumber
0x3ff0000000000000

(lldb) po SciChartVersionString
0x474f525029232840

I wanted to know what version I’m using.. but i couldn’t know… what version am i using..?

Showing 1 - 50 of 92 results