SciChart® the market leader in Fast WPF Charts, WPF 3D Charts, and now iOS Charting & Android Chart Components

Welcome to the SciChart Community Forums!

Please use the forums below to ask questions about SciChart. Take a moment to read our Question asking guidelines on how to ask a good question and our support policy. We also have a tag=SciChart on Stackoverflow.com where you can earn rep for your questions!

Please note: SciChart team will only answer questions from customers with active support subscriptions. Expired support questions will be ignored. If your support status shows incorrectly, contact us and we will be glad to help.

1 vote
120 views

To whom this may concern:

I’d like to refer to the “Spline Scatter Line Chart” example in the SciChart Examples package. If I were to make this a CustomRenderableSeriesViewModel that I can set in a ViewModel class, how would I go about doing that?

I am using SciChart v4, and here’s what I know so far:

  1. CustomRenderableSeriesViewModel : BaseRenderableSeriesViewModel
  2. ViewType = typeof(CustomRenderableSeries)

My code so far is:

public class CustomRenderableSeriesViewModel : BaseRenderableSeriesViewModel
{
    public override Type ViewType => typeof(CustomRenderableSeries);
}

How would I go about setting the IsSplineEnabled property of the CustomRenderableSeries through the CustomRenderableSeriesViewModel class?

FYI: I have looked here and the Worked Example – CustomRenderableSeries in MVVM link goes to the SciChart v5 User manual.
Additionally, this is a duplicate of this issue on Stack Overflow (since I thought you were still fielding questions on there). Feel free to answer on either or both.

Can you please advise?

  • Ari Sagiv asked 3 months ago
  • last active 3 months ago
0 votes
614 views

I try to add data series and have them rendered on a chart surface. The surface and entire chart library is wrapped in an mvvm-based api. The sci chart control and wrapping library are rendered on a document panel. I add new data series via the viewmodel and here is where I have some unexpected behavior:

a) When being on a different document panel, meaning the chart control is NOT visible, and when I add a new data series via view model and then view the document panel that hosts the sci chart control, no chart series are rendered on the chart but I do see the correct legend data (such as chart series name, color, stroke thickness). Please see below screen shot “Capture1.jpg” .

b) When I make the sci chart control visible by viewing the document panel that hosts the sci chart control and then via a button and command add the very same data series via my chart control’s view model the charts are correctly rendered. Please see “Capture2.jpg”.

My question is why is that the case? I basically expose a method in my chart library view model that lets me add data and if I invoke that methods while being on a document panel that does not host the chart control the added data series is not rendered on the chart. But strangely the correct chart legend data are displayed and also the chart control itself is correctly rendered. No problems when the hosting document panel is active and the very same method is invoked.

Basically what I currently observe is that the data series are not rendered at all as long as the chart control is not “in view” or the hosting document panel is not selected. I am sure programmatically all references and bindings are correct.

I have spend many hours debugging this issue and do not seem to find an answer. Any pointers?

Thanks a lot,
Matt

Edit:

Here is how I bind the content control to the view model of my sci chart charting library (user control)

<ContentControl Grid.Row="1" Content="{Binding ChartControl, Mode=OneWay}" />

…and the view model is instantiated in the hosting view model constructor:

public MainWindowViewModel()
{
   ChartControl = new SciChartControlViewModel();

    ExitApplicationCommand = new RelayCommand(OnExitApplicationCommand);
    LoadDataSeriesFromFilesCommand = new RelayCommand(OnLoadDataSeriesFromFilesCommand);
    RefreshDataSeriesFromFilesCommand = new RelayCommand(OnRefreshDataSeriesFromFilesCommand);


    Test();

}

…Test() performs the following action:

private void Test()
{
    var quotes = new List<Quote>();
    List<DateTime> timeStamps = new List<DateTime>();
    List<double> values = new List<double>();
    List<SciChartAnnotation> annotations = new List<SciChartAnnotation>();
    Random rand = new Random((int)DateTime.Now.Ticks);
    DateTime currentDt = DateTime.Now;
    double currentValue = 0;

    for (int index = 0; index <= 50000; index++)
    {
        var randomValue = rand.NextDouble();
        currentDt = currentDt + TimeSpan.FromSeconds(randomValue);
        currentValue = currentValue + randomValue - 0.5;

        if (index % 1000 == 0)
        {
            var buySell = rand.NextDouble() > 0.5 ? SciChartAnnotationDirection.Buy : SciChartAnnotationDirection.Sell;
            annotations.Add(new SciChartAnnotation(buySell, currentDt, currentValue, "Index:" + index));
        }

        timeStamps.Add(currentDt);
        values.Add(currentValue);

        quotes.Add(new Quote(){DataProviderId = "Provider1", SymbolId = "Symbol1", QuoteType = QuoteType.BidAsk, CompressionType = TimeCompressionType.NoCompression, CompressionUnits = 0, TimeStamp = currentDt, Bid = currentValue, Ask= currentValue + 0.05, });

    }

    ChartControl.AddDataSet("Pane1", "0.00000", quotes, annotations);
    //ChartControl.AddDataSet("MattSeries", ChartType.Scatter, 1, "0.00000", timeStamps, values);

}

…it basically tries to render chart series and annotations.

Strangely, as mentioned before, the series legends render correctly and the annotations also all render correctly but the chart series do not! Could this be a bug?

  • bbmat asked 1 year ago
  • last active 12 months ago
0 votes
870 views

I refactored from using custom RenderableSeries to a custom RenderableSeriesViewModel which has fixed a refresh bug in the chart:

  public class CustomExclusionRenderableSeriesViewModel : BaseRenderableSeriesViewModel
  {
     public override Type RenderSeriesType => typeof(CustomExclusionRenderableSeries);
  }

However I am invoking MouseLeftButtonUp in the chart code behind and performing a hit test. The HitTest method is not exposed on the BaseRenderableSeriesViewModel:

 private void SciChartSurfaceMouseLeftButtonUp(object sender, MouseButtonEventArgs e)
 {                          
    // Perform the hit test relative to the GridLinesPanel
    Point hitTestPoint = e.GetPosition(this.sciChart.GridLinesPanel as UIElement);

    // Get hit test the RenderableSeries using interpolation
    this.ViewModel.HitTestInfo = this.ViewModel.ExclusionSeries.HitTest(hitTestPoint, true);

Is there any way to get the series instance from the view model & hit test it?

0 votes
970 views

I manually re-calculate my displayed axis ranges when new data points are appended or when a specific portion of the data is selected to view from a ListBox, but I would like to leave the axis ranges as-is if the user has zoomed-in (using the built-in ZoomModifiers). Is there a way for my ViewModel to know this has happened so I can avoid recalculating in that case?

Thanks!

0 votes
0 answers
3k views

I noticed that there are problems when I try to add data series, create renderable series, or annotations while the view that hosts the scichartgroup and/or scichartsurface(s) is/are not yet initialized/rendered. Could this be a bug? After all it should not matter when the view is rendered; when it is rendered its elements bind to the matching properties of its viewmodel, no?

This poses problems for me because I am forced to take the viewmodel-first approach. So, when I create an instance of my viewmodel and then invoke methods in the viewmodel that add data series and render such I am experiencing errors (the rendered series is not displayed on the chart, though annotations strangely are).

I identified the problem to be 2-fold, one is that I have to create renderable series on the UI thread (solved that, no issue) but my other big problem is that the view is actually not instantiated/rendered unless the view is in focus/visible which is not the case during runtime when data series are added via viewmodel.

How can I solve this problem?

  • bbmat asked 3 years ago
  • last active 3 years ago
0 votes
0 answers
4k views

I try to add data series and have them rendered on a chart surface. The surface and entire chart library is wrapped in an mvvm-based api. The sci chart control and wrapping library are rendered on a document panel. I add new data series via the viewmodel and here is where I have some unexpected behavior:

a) When being on a different document panel, meaning the chart control is NOT visible, and when I add a new data series via view model and then view the document panel that hosts the sci chart control, no chart series are rendered on the chart but I do see the correct legend data (such as chart series name, color, stroke thickness). Please see below screen shot “Capture1.jpg” .

b) When I make the sci chart control visible by viewing the document panel that hosts the sci chart control and then via a button and command add the very same data series via my chart control’s view model the charts are correctly rendered. Please see “Capture2.jpg”.

My question is why is that the case? I basically expose a method in my chart library view model that lets me add data and if I invoke that methods while being on a document panel that does not host the chart control the added data series is not rendered on the chart. But strangely the correct chart legend data are displayed and also the chart control itself is correctly rendered. No problems when the hosting document panel is active and the very same method is invoked.

Basically what I currently observe is that the data series are not rendered at all as long as the chart control is not “in view” or the hosting document panel is not selected. I am sure programmatically all references and bindings are correct.

I have spend many hours debugging this issue and do not seem to find an answer. Any pointers?

Thanks a lot,
Matt

Edit:

Here is how I bind the content control to the view model of my sci chart charting library (user control)

<ContentControl Grid.Row="1" Content="{Binding ChartControl, Mode=OneWay}" />

…and the view model is instantiated in the hosting view model constructor:

public MainWindowViewModel()
    {
       ChartControl = new SciChartControlViewModel();

        ExitApplicationCommand = new RelayCommand(OnExitApplicationCommand);
        LoadDataSeriesFromFilesCommand = new RelayCommand(OnLoadDataSeriesFromFilesCommand);
        RefreshDataSeriesFromFilesCommand = new RelayCommand(OnRefreshDataSeriesFromFilesCommand);


        Test();

    }

…Test() performs the following action:

private void Test()
    {
        var quotes = new List<Quote>();
        List<DateTime> timeStamps = new List<DateTime>();
        List<double> values = new List<double>();
        List<SciChartAnnotation> annotations = new List<SciChartAnnotation>();
        Random rand = new Random((int)DateTime.Now.Ticks);
        DateTime currentDt = DateTime.Now;
        double currentValue = 0;

        for (int index = 0; index <= 50000; index++)
        {
            var randomValue = rand.NextDouble();
            currentDt = currentDt + TimeSpan.FromSeconds(randomValue);
            currentValue = currentValue + randomValue - 0.5;

            if (index % 1000 == 0)
            {
                var buySell = rand.NextDouble() > 0.5 ? SciChartAnnotationDirection.Buy : SciChartAnnotationDirection.Sell;
                annotations.Add(new SciChartAnnotation(buySell, currentDt, currentValue, "Index:" + index));
            }

            timeStamps.Add(currentDt);
            values.Add(currentValue);

            quotes.Add(new Quote(){DataProviderId = "Provider1", SymbolId = "Symbol1", QuoteType = QuoteType.BidAsk, CompressionType = TimeCompressionType.NoCompression, CompressionUnits = 0, TimeStamp = currentDt, Bid = currentValue, Ask= currentValue + 0.05, });

        }

        ChartControl.AddDataSet("Pane1", "0.00000", quotes, annotations);
        //ChartControl.AddDataSet("MattSeries", ChartType.Scatter, 1, "0.00000", timeStamps, values);

    }

…it basically tries to render chart series and annotations.

Strangely, as mentioned before, the series legends render correctly and the annotations also all render correctly but the chart series do not! Could this be a bug? Please refer to the image “Capture3” for a screenshot.

  • bbmat asked 3 years ago
  • last active 3 years ago
Showing 6 results
This template supports the sidebar's widgets. Add one or use Full Width layout.