Forums

Hi guys,

Is it possible to capture the tap event when we tap on a point marker or a data point? I can see there’s a DataPointSelectionModifier for WPF, but there’s nothing for iOS. Our goal is to show a popup (tooltip) on the point marker when the user taps on it.

Thanks,
Lazar Nikolov

Hi, guys

I want to show two renderableSeries on one chart view. These series have common x-axis (SCICategoryDateTimeAxis) and separate y-axes(SCINumericAxis). Only one of y-axis is visible at chart view. Also the data series of visible renderable series updated by scrolling to left or to right. So for displaying on one view i’m using:

[y1Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.3) Max:SCIGeneric(0.07)]];
[y2Axis setGrowBy: [[SCIDoubleRange alloc] initWithMin:SCIGeneric(0.0) Max:SCIGeneric(5)]];

So it’s look good at start (Correct_zooming.png). But after some scrolling it decrease axis extents of invisible y-axis (decrease.png).
Or even breaks down (broken.png)

For test i’m using SCIFastOhlcRenderableSeries and SCIHorizontallyStackedColumnsCollection readerable series.
Data series for SCIHorizontallyStackedColumnsCollection is initializated like:

    [volumeSerie1 updateAt:index Y:SCIGeneric(100000 / [multiplier doubleValue])];
    [volumeSerie2 updateAt:index Y:SCIGeneric(500000 / [multiplier doubleValue])];

So can you look at it?
Or what way i should implement this behavior?

Best regards,
Sushynski Andrei

I want to develop a rollover in my IOS application, like the example of Using RolloverModifier. However, the axis label & tooltip display of rollover in this example is static, I want to customize a the the label & tooltip that I want, .xib file or coding to develop also fine.

Can anyone help or give suggestions to my problems? Thanks.

Hi, guys

I’m interesting in alignment for line at SCIAxisMarkerAnnotation. For example for top, middle and bottom position. Like at alignment_to_top.png. So is there some possibility for this?

UDP: Is there possibility to hide annotation from chart view?
Something like setHidden: for UIView.

Best regards,
Sushynski Andrei

Hi!
I am going through the showcase example for the spectrogram and I had a confusion on the sizeX and Y parameter of SCIUniformHeatmapDataSeries. Are these sizes as per the width and height of the surfaceChart ? I am going to plot an array of data. How do I determine the correct sizes for X and Y.
Moreover, is it necessary that the size array used for updating the dataSeries has to be (xSize*ySize)?

Currently we have two graph surfaces with two Y axes on each side and we need all of the Y axes to have fixed width size. Until now we were achieving that like this:
topGraphSurface.LeftAxisAreaForcedSize = 45;
topGraphSurface.RightAxisAreaForcedSize = 45;
bottomGraphSurface.LeftAxisAreaForcedSize = 45;
bottomGraphSurface.RightAxisAreaForcedSize = 45;

but since updating to the new SciChart v3 we get the error “SciChartSurface does not contain a definition for (Left)AxisAreaForcedSize”. I couldn’t find any information about this in the Migration guide, so is there a way to achieve this in the new version?

We need to generate adhoc ipa file for review purpose and we are using the trial version, but its fails. Can you help us on the same?

Andrew required swift code so I attach the code.
Please answer my question again.

https://www.scichart.com/questions/question/customize-chart-designwith-pic
https://www.scichart.com/questions/question/cannnot-remove-weird-square-areas

Andrew answered second question, but it didn’t work.
There is no drawAxisBands.

Hi, guys

Is it possible to set min and max zoom constraints for renderable serie with one element ?
Default value (default_zoom.PNG) is too big.

Can you look at this?

Best regards,
Sushynski Andrei

I would like to add scrollBar to SCINumericAxis for example xAxis.

I did find documentation:
https://www.scichart.com/documentation/v5.x/webframe.html#Scrollbars.html

But on iOS version, I can’t find numericAxis.Scrollbar is missing

If we set ClipMode.None we can pan infinitely to the uncharted space of left and right. this is fine.
But I want to do panning infinitely only to the left side. So I set ‘clipAtMax’. This is stop panning at right. But instead of panning infinity to the left, it is stretching the left part.
Any solution ?

It seems most of the modifiers bring up tooltip data with a pan, and then it goes away when the user lifts their finger. Is there any way to bring up tooltip data with a tap (and does not go away when the finger has lifted)? The main problem that we’re trying to solve is that we would like to be able to pan to look at the chart (and don’t want an axis pan), but would also like to bring up tooltip data.

It would be nice to have an access to repo through CocoaPods. You can create a private spec repo and share with developers. https://guides.cocoapods.org/making/private-cocoapods.html

Hello, I’m trailing your library right now. I would like to be able to move the graph around as well as a cursor on the graph. So I enabled both SCIZoomPanModifier and SCICursorModifier. But since both use one finger panning, the result wasn’t that good. Do you have any guidance for solving the conflict and letting them working together? I’m thinking to do it in the following way: if the touch location is within certain pixel range of the cursor, panning action will move the cursor, otherwise it moves the graph. Is it possible? Thanks

Hi,
we are using an UICollectionView to display different kinds of views in our application, including charts created with SciChart. We noted that every time a cell with a SciChart is loaded, some memory is allocated and not freed when the cell disappears, which leads to a massive memory leak and eventually crashes the application.
Is there a way to free SciChart resources on demand? Or maybe you suggest another solution to solve this issue?
Regards,
Anna

Is the styleFor function of SCIPaletteProvider that was in Version 2.0 not implemented in Version 4.8?
Also, are there any plans to implement it?

I am upgrading from SciCharts 2.0.1 to SciCharts 4.3.
When the color was set using SCI Palatt Provider in Version 2.0, the memory used was 200M, but in Version 4.3, the memory used may consume as much as 1G.
I tried to devise it by setting the Sampleing Mode, but it is not very effective.

SCI Charts is used to display the spectrum data of audio data while playing the sound.

Hello

Is it possible do detect taps/selection/click over the PointMarkers?

Thanks!

Have recently converted to xcode 10 and swift 4.2.

Am now receiving this error message on build.

SciChart.framework/SciChart
Reason: no suitable image found. Did find:
/usr/lib/libstdc++.6.dylib: mach-o, but not built for iOS simulator

Any ideas?

Hi Sir/Madam,
I have created a Mountain Series with gradient fill. below is part of my code:

-(SCIRenderableSeriesBase *)getTimeSharePlot:(SCIXyDataSeries*)xySeries{
    SCIFastMountainRenderableSeries * rSeries = [SCIFastMountainRenderableSeries new];
    rSeries.dataSeries = xySeries;
    rSeries.strokeStyle = [[SCISolidPenStyle alloc] initWithColor:[UIColor colorWithRed:0 green:0 blue:0 alpha:1] withThickness:1];
    rSeries.areaStyle = [[SCILinearGradientBrushStyle alloc] initWithColorStart:[UIColor colorWithRed:32/255.0 green:56/255.0 blue:124/255.0 alpha:1.0] finish:[UIColor whiteColor] direction:SCILinearGradientDirection_Vertical];

    return rSeries;
}

When i run the test, the chart is just filling with solid color
Would you please help?
BR,
Tommy

Hi guys,

I want to show x value on chart bar itself as shown in the attached image along with this query. I tried using annotation where I need to give x and y value each time and it look not appropriate in the 2 data series column chart using, instead of that I need easy way to represent label of bar value on graph bar.

please suggest if any.

Thanks in advance.

Hello.
We updated scichart to 2.5.0 version and got issue:
We have SCIAxisMarkerAnnotation with market line and set markerLinePen:

let mainDashPattern: [NSNumber] = [1.1, 1.0, 1.1, 1.0]
style.markerLinePen = SCISolidPenStyle(color: mainBlack15, withThickness: 1.0, andStrokeDash: mainDashPattern)

Sometimes, after create new chart, all lines with strokeDash colored with solid black color.

I added screenshots.

Thanks,
Alexey.

Hi,

I’ve encountered an issue with the candlestick graph I’ve drawn that consists of a set of random X date time values – this causes the candlesticks have varying distances from one another.

Rendering the data from an initial set seems to be fine but as I run a NSTimer to add on more points, the body of the new candlesticks seem to be 0. (Note, the date time values are still random but have been made to be set after the last placed point)

In fact, the initial data points that I added see to be rendered ‘body-less’ if it’s within the same visible range as the newly added points. And if I pan along the newly added points, the bodies of some data points will appear at random visible ranges.

Is this a normal behaviour or should I take anything else into consideration?

Here are a couple of my configurations which I think may have affected anything:
1. My XAxis has set its visible range limit mode to ClipMode_Min
2. Candlestick series style data body width is set to be default.
3. I have a the following modifiers set up.

self.xDragModifier = [SCIXAxisDragModifier new];
self.xDragModifier.axisId = @"xAxis";
self.xDragModifier.dragMode = SCIAxisDragMode_Pan;
self.xDragModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
[self.xDragModifier setModifierName:@"XAxis DragModifier"];

self.pinchZoomModifier = [[SCIPinchZoomModifier alloc] init];
[self.pinchZoomModifier setModifierName:@"PinchZoom Modifier"];
self.pinchZoomModifier.xyDirection = SCIXYDirection_XDirection;

self.zoomPanModifier = [SCIZoomPanModifier new];
self.zoomPanModifier.clipModeX = SCIZoomPanClipMode_ClipAtMin;
self.zoomPanModifier.xyDirection = SCIXYDirection_XDirection;
[self.zoomPanModifier setModifierName:@"ZoomPan Modifier"];

SCIModifierGroup * gm = [[SCIModifierGroup alloc] initWithChildModifiers:@[self.xDragModifier, self.pinchZoomModifier, self.zoomPanModifier]];
self.chartSurface.chartModifier = gm;

The points are drawing just fine, but the body of the candlestick is not appearing as expected.

Thanks in advance.

I am adding a SCICustomAnnotation on a particular graph bar click. But the annotation always gets added to a fixed location and is not varying according to the selection. Whereas if I am adding the annotation during the init(), it’s getting added on the correct location point.
Ex:
if let annotationValue = viewModel.categoryModel?.value, annotationValue > 0 {
let customAnnotationGreen = SCICustomAnnotation()
customAnnotationGreen.horizontalAnchorPoint = .center
let imageView = UIImageView(image: #imageLiteral(resourceName: “Triangle”))
imageView.frame = CGRect(origin: .zero, size: CGSize(width: 10, height: 10))

                    customAnnotationGreen.customView = imageView// UIImageView(image: #imageLiteral(resourceName: "Triangle"))
                    if let value = viewModel.categoryModel?.graphDataPoints.values[hitTestInfo.dataSeriesIndex].toDouble() {
                        customAnnotationGreen.set(x1: hitTestInfo.dataSeriesIndex)
                        customAnnotationGreen.set(y1: value)
                        self.columnChart.annotations.add(customAnnotationGreen)
                    }
                }

Hey everyone, my team currently has Scicharts for WPF set up and functioning the way we want it too.

We are moving to Xamarin and have tested Scicharts in a Xamarin.Forms project working for Android/iOS and Windows WPF.
The next step was to install Visual Studios for Mac, and setup a new Xamarin.Forms project and pull the code from the windows version of our Xamarin.Forms project. For windows we use a custom renderer to get the scicharts to work for all platforms available on the windows version. For Mac, we are trying to get a custom renderer set up to load the swift version of the Scicharts for Mac. It’s not going so well.

Can anyone provide details on if it’s possible to get a xaramarin.forms project to load the scicharts for mac framework?

Thanks

NOTE** I picked iOS because for some reason MacOS wasn’t in the list of platforms

I was testing my charts on a simulator and when I naved away and then back to the chart screen the Simulator’s chart was totally black screen; I could move the mouse over the points and the popouts would occur; and your license notice showed in the center of the chart. So it was almost like it thought all the drawing for the chart itself needed to be black on black.

It was always broken on the 2nd or later chart. Restarting the app fixed it. I tried removing all custom settings, and calling the invalidate; and nothing caused it to redraw correctly… Fortunately, when deploying to real devices everything worked correctly. Is this an expected side effect of testing on a simulator, or is their something that I can do to force a hard refresh of the chart…

FYI: The additional debug diagnostics don’t seem to do anything on a simulator, or at least I couldn’t find anywhere it was logged.

I want to hide the axis and the place occupied by the axis on xammarin.iOS, i’am using below code to do the same, the problem here is it does hide the axis but it is not removing the place occupied by axis,

Axis.IsVisible = false;

is it the right way to hide the axis and remove the place occupied by it, or am I missing something here.

Hi

I have a SCIFastLineRenderableSeries backed by data in SCIXyDataSeries.

I setup FIFO to 300 (this just a number I may increase, but it stores 30+ seconds of data)

x data is time stamp.

each time I have new data, I set a new visibleRange to show about 30 seconds of data on screen

xAxis.visibleRange = [[SCIDoubleRange alloc] initWithMin:SCIGeneric(secondSinceStart-31) Max:SCIGeneric(secondSinceStart)];

So this will scroll along showing latest 30 seconds of data. And that’s great.

But I want to scroll to the left to view the older data. because of the visibleRange is set I am not able to touch the axis labels and do anything)

how do I set the visibleRange or maybe not set it, so I can enable the scroll.

Here is the drag modifier I use , but I think it does not do anything either because of the visibleRange
SCIXAxisDragModifier * xAxisDragmodifier = [SCIXAxisDragModifier new];
xAxisDragmodifier.dragMode = SCIAxisDragMode_Pan;
xAxisDragmodifier.clipModeX = SCIClipMode_None;

Thanks

Hi, guys

Is there possibility to show tooltip by simply changing switch at the settings?
Not by tapping at the chart area as it implemented now.

Best regards,
Sushynski Andrei

After upgraded SciChart to SciChart_iOS_SDK_3.0.0.5074, using rollover modifier on a SciChart surface which was embedded into a scroll view will crash the app. It crashed when user scroll horizontally on a SciChart surface inside a horizontal scrollable scrollview. It is the same with the vertically scrollable scrollview.

2020-03-09 10:14:15.489302+0800 ******[4835:62890] -[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500

2020-03-09 10:14:15.503967+0800 *******[4835:62890] *** Terminating app due to uncaught exception ‘NSInvalidArgumentException’, reason: ‘-[SCIRolloverModifier onTouchesCancelled:]: unrecognized selector sent to instance 0x60000ba28500’
*** First throw call stack:
(
0 CoreFoundation 0x00007fff23c7127e exceptionPreprocess + 350
1 libobjc.A.dylib 0x00007fff513fbb20 objc_exception_throw + 48
2 CoreFoundation 0x00007fff23c91fd4 -[NSObject(NSObject) doesNotRecognizeSelector:] + 132
3 CoreFoundation 0x00007fff23c75c4c forwarding + 1436
4 CoreFoundation 0x00007fff23c77f78 _CF_forwarding_prep_0 + 120
5 SciChart 0x000000011139aaba -[SCITouchModifierBase onEvent:] + 186
6 SciChart 0x000000011135dfd8 +[SCIEventManager raiseOnEvent:toTarget:isMaster:] + 267
7 SciChart 0x000000011132d03f __38-[SCIEventDispatcher p_SCI_commonInit]_block_invoke + 165
8 SciChart 0x000000011132d45d -[SCIEventDispatcher raiseOnEvent:withAction:] + 569
9 SciChart 0x000000011133fa94 -[SCIChartSurfaceBase p_SCI_onTouchEvent:] + 233
10 SciChart 0x000000011133f996 -[SCIChartSurfaceBase touchesCancelled:withEvent:] + 209
11 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
12 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
13 UIKitCore 0x00007fff480bf863 forwardTouchMethod + 340
14 UIKitCore 0x00007fff480bf974 -[UIResponder touchesCancelled:withEvent:] + 49
15 UIKitCore 0x00007fff480a4a43 __106-[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:]_block_invoke + 609
16 UIKitCore 0x00007fff480a429e -[UIApplication _cancelTouchesOrPresses:withEvent:includingGestures:notificationBlock:] + 1163
17 UIKitCore 0x00007fff480a47ac -[UIApplication _cancelViewProcessingOfTouchesOrPresses:withEvent:sendingCancelToViewsOfTouchesOrPresses:] + 158
18 UIKitCore 0x00007fff47c37f2f -[UIGestureEnvironment _cancelTouches:event:] + 707
19 UIKitCore 0x00007fff47c40115 -[UIGestureRecognizer _updateGestureForActiveEvents] + 1779
20 UIKitCore 0x00007fff47c31eda _UIGestureEnvironmentUpdate + 2706
21 UIKitCore 0x00007fff47c3140a -[UIGestureEnvironment _deliverEvent:toGestureRecognizers:usingBlock:] + 467
22 UIKitCore 0x00007fff47c3117f -[UIGestureEnvironment _updateForEvent:window:] + 200
23 UIKitCore 0x00007fff480d04b0 -[UIWindow sendEvent:] + 4574
24 UIKitCore 0x00007fff480ab53b -[UIApplication sendEvent:] + 356
25 UIKit 0x0000000114ad2bd4 -[UIApplicationAccessibility sendEvent:] + 85
26 UIKitCore 0x00007fff4812c71a __dispatchPreprocessedEventFromEventQueue + 6847
27 UIKitCore 0x00007fff4812f1e0 __handleEventQueueInternal + 5980
28 CoreFoundation 0x00007fff23bd4471 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION + 17
29 CoreFoundation 0x00007fff23bd439c __CFRunLoopDoSource0 + 76
30 CoreFoundation 0x00007fff23bd3b74 __CFRunLoopDoSources0 + 180
31 CoreFoundation 0x00007fff23bce87f __CFRunLoopRun + 1263
32 CoreFoundation 0x00007fff23bce066 CFRunLoopRunSpecific + 438
33 GraphicsServices 0x00007fff384c0bb0 GSEventRunModal + 65
34 UIKitCore 0x00007fff48092d4d UIApplicationMain + 1621
35 ****** 0x000000010b51505f main + 143
36 libdyld.dylib 0x00007fff5227ec25 start + 1
37 ??? 0x0000000000000001 0x0 + 1
)

I am using sci charts to show live graphs of some devices. While displaying a graph on IPhone X or iPhone 6s it sometimes lags and lines started overlapping. It’s working fine on devices iPhone XSMax, iPhone 11. I have attached a 3 screenshots. Once when graph starts lagging, 2nd when graph is in middle, 3 when graph completes. please have a look. It starts lagging and overlapping lines when a new graph starts and when it ends it shows a complete graph shown and then again same issue repeats. It also started working correctly after some time. I need information about this issue. How to fix it and why it’s happening like this…

Hi, I’ve found that there is no example of using SciChart in SwiftUI, the swift examples are using storyboard.

I’ve tried that, using SciChart in SwiftUI, and it worked. But I have some confusions about axis update and data update.

in SwiftUI, first I create a chartview struct as NSViewRepresentable, and in func makeNSView(context: Context) -> SCIChartSurface{} to initialize the chartview as any supported SciChart view type.

second, in func updateNSView(_ nsView: SCIChartSurface, context: Context){} to update the data and axis.

When updating axis(like visiablerange), every time I need call nsView.xAxes.clear() to remove axis first and then add axis again.

When updating data, every time I need to call nsView.renderableSeries.clear() to clear current plot data first and then call nsView.renderableSeries.add() to update the data.

My confusion is that is this the right way to do that? It seems not quite efficient.

Hello,

We have an app where we need to specify a different width for each column. I have attached an image of the result we want. We are currently using “SCIFastColumnRenderableSeries” for the diagram, but all columns have a fixed width and I couldn’t find any way to modify it.

Do you have any suggestions how to accomplish this?

Thanks!

Good day!
I need to determine the value of the visible graph y from the x value and the problem is that I can’t calculate the y value outside of the data I’m rendering
example data:
[
{ x:1, y: 10 },
{ x:5, y: -5 },
{ x: 9, y: 15}
]

I use SCISplineMountainRenderableSeries and I need to show the intersection of the graph at point 3.5
I need a point but I have only one coordinate value

how can i get this y value?