Tag: javascript

I want to build a Stacked Column Side by Side Chart by referring to the reference here.

However, the program could not enter line #41. It just stuck there and the column chart could not be shown.

My code:

export class OutputAmplitudeComponent implements OnInit, OnDestroy {

constructor(@Inject(SETTING_SERVICE) private settingService: SettingService, private cdr: ChangeDetectorRef) {}

ngOnInit() {        
                this.settingService.registerSetting(HarmonicAmpSetting).pipe(takeUntil(this.ngUnsubHarmonicData)).subscribe(setting => {
                    const OutputAmplitudeData = setting.value;

                    for (let x = 1; x < this.numberOfOutput; x++) {
                        if (this.OutputMode === 'Voltage') {
                            if (phaseNum === 1) {
                                this.ampSource.data[x-1].voltage1 = OutputAmplitudeData[x];
                            } else if (phaseNum === 2) {
                                this.ampSource.data[x-1].voltage2 = OutputAmplitudeData[x];
                            } else if (phaseNum === 3) {
                                this.ampSource.data[x-1].voltage3 = OutputAmplitudeData[x]; 
                            }
                        } else if (this.OutputMode === 'Current') {
                            if (phaseNum === 1) {
                                this.ampSource.data[x-1].current1 = OutputAmplitudeData[x];
                            } else if (phaseNum === 2) {
                                this.ampSource.data[x-1].current2 = OutputAmplitudeData[x];
                            } else if (phaseNum === 3) {
                                this.ampSource.data[x-1].current3 = OutputAmplitudeData[x];
                            }
                        }
                        this.sciChartInit(x);
                    }   
                });
            }   


async sciChartInit(x:number) {

    var phase1 = parseFloat(this.ampSource.data[x-1].voltage1);
    var phase2 = parseFloat(this.ampSource.data[x-1].voltage2);
    var phase3 = parseFloat(this.ampSource.data[x-1].voltage3);

    //stuck here

    const { wasmContext, sciChartSurface } = await SciChartSurface.create("chart");

    const xAxis = new NumericAxis(wasmContext);
    sciChartSurface.xAxes.add(xAxis);
    const yAxis = new NumericAxis(wasmContext);
    sciChartSurface.yAxes.add(yAxis);

    const dataSeries1 = new XyDataSeries(wasmContext, { xValues:[x], yValues:[phase1], dataSeriesName: "Phase 1" });
    const dataSeries2 = new XyDataSeries(wasmContext, { xValues:[x], yValues:[phase2], dataSeriesName: "Phase 2" });
    const dataSeries3 = new XyDataSeries(wasmContext, { xValues:[x], yValues:[phase3], dataSeriesName: "Phase 3" });

    const rendSeries1 = new StackedColumnRenderableSeries(wasmContext);
    rendSeries1.fill = "#dc443f";
    rendSeries1.stroke = "black";
    rendSeries1.strokeThickness = 1;
    rendSeries1.dataSeries = dataSeries1;
    rendSeries1.rolloverModifierProps.markerColor = "#b83735";
    rendSeries1.rolloverModifierProps.tooltipColor = "#dc443f";
    rendSeries1.rolloverModifierProps.tooltipTextColor = "#fff";
    rendSeries1.stackedGroupId = "one";

    const rendSeries2 = new StackedColumnRenderableSeries(wasmContext);
    rendSeries2.fill = "#aad34f";
    rendSeries2.stroke = "black";
    rendSeries2.strokeThickness = 1;
    rendSeries2.dataSeries = dataSeries2;
    rendSeries2.rolloverModifierProps.markerColor = "#87a73e";
    rendSeries2.rolloverModifierProps.tooltipColor = "#aad34f";
    rendSeries2.rolloverModifierProps.tooltipTextColor = "#000";
    rendSeries2.stackedGroupId = "two";

    const rendSeries3 = new StackedColumnRenderableSeries(wasmContext);
    rendSeries3.fill = "#8562b4";
    rendSeries3.stroke = "black";
    rendSeries3.strokeThickness = 1;
    rendSeries3.dataSeries = dataSeries3;
    rendSeries3.rolloverModifierProps.markerColor = "#715195";
    rendSeries3.rolloverModifierProps.tooltipColor = "#8562b4";
    rendSeries3.rolloverModifierProps.tooltipTextColor = "#fff";
    rendSeries3.stackedGroupId = "three";

    const verticallyStackedColumnCollection = new StackedColumnCollection(wasmContext);
    verticallyStackedColumnCollection.dataPointWidth = 0.5;
    verticallyStackedColumnCollection.add(rendSeries1, rendSeries2, rendSeries3);
    verticallyStackedColumnCollection.animation = new ScaleAnimation({ duration: 1000, fadeEffect: true });

    sciChartSurface.renderableSeries.add(verticallyStackedColumnCollection);

    sciChartSurface.chartModifiers.add(new ZoomExtentsModifier(), new ZoomPanModifier(), new MouseWheelZoomModifier());

    sciChartSurface.zoomExtents();

    sciChartSurface.chartModifiers.add(new RolloverModifier({ rolloverLineStroke: "#228B22" }));
    sciChartSurface.chartModifiers.add(
        new LegendModifier({
            placement: ELegendPlacement.TopRight,
            orientation: ELegendOrientation.Horizontal,
            showLegend: true,
            showCheckboxes: true,
            showSeriesMarkers: true
        })
    );
    return { wasmContext, sciChartSurface };
} }

.
.
The data needed in the chart is identified and no error is shown.
Any idea on the solution?

Thank you.

I am getting a console error when using isVisible: false to the FastLineRenderableSeries or FastMountainRenderableSeries and CursorModifier together.

If the y axis values are same then the lines are not visible on the chart and the labels are also not visible on the chart. Can you draw the lines on the middle of the chart to get more visible?

async initTrack() {
  const { wasmContext, sciChartSurface } = await SciChartSurface.create(
    "chart" + this.element
  );
  sciChartSurface.xAxes.add(
    new NumericAxis(wasmContext, { axisAlignment: EAxisAlignment.Top })
  );
  sciChartSurface.yAxes.add(
    new NumericAxis(wasmContext, {
      axisAlignment: EAxisAlignment.Left
    })
  );

  const dataSeries = new XyDataSeries(wasmContext);
  for (let i = 0; i <= 1000; i++) {
    dataSeries.append(i, 10);
  }

  const rendSeries = new FastLineRenderableSeries(wasmContext, {
    dataSeries: dataSeries,
    strokeThickness: 1,
    stroke: "red"
  });
  sciChartSurface.renderableSeries.add(rendSeries);
  sciChartSurface.chartModifiers.add(cursorModifier);

  return { wasmContext, sciChartSurface };
}

Some users have reported an error when importing SciChart.js into a TypeScript or JavaScript application:

TS1261: Already included file name ‘C:...\SciChartSurface.d.ts’ differs from file name ‘C:/…/node_modules/scichart/charting/
Visuals/Axis/SciChartSurface.d.ts’ only in casing.

Solution below…

Hi,
Unsorted xValues is possible on SCI Chart? I tried with dataIsSortedInX: false and isSorted: false on dataSeries, But its not showing the correct range.

eg:

 new XyDataSeries(wasmContext, {
        dataSeriesName: "Line Series",
        xValues: [0,10,20,13,54,15,26,17,18,19],
        yValues: [0,1,5,1,20,5,1,8,9,3],
    dataIsSortedInX: false
    });

Hi,

If the FastMountainRenderableSeries isVisible is true when creating a series and after sometimes tries to change the visible property and getting error from rolloverModifier.

Can you please check the example i have created.

On Vertical chart Label overlapping on smaller height. I have tried maxAutoTicks also and on the lower height, it’s getting one error. This error is occurring when the width is 0 sometimes. Can you please check this issues?

When displaying a value in a stacked column chart, if the value is negative, the negative value should be drawn from the 0 position of the y-axis or from below the other negative value if it exists. Similarly, the positive value after the negative should be drawn from the 0 position of the y-axis or from above the other positive value if it exists. But instead, in both cases, they are being drawn from the end of the previous value, resulting in overlapping.

On the vertical chart custom tooltipSvgTemplate seriesInfo isHit returns false always. Its working fine on the normal chart. Can you please check this issue is on verticle chart.

I am wondering if there may be some guidance on how to configure the styles for the SciChart.js chart instance in a React application to be able to handle dynamic changes to the height value.

The scenario is that the chart and wasm context are being saved in refs, so that the component the chart exists within does not rerender. Data is being consumed via a web socket, and streaming realtime data.

All that is well and good, but trying to implement a new feature request where the height of the chart changes dynamically, similar to an accordion style where the chart may have a full view, a split view, or no view (92vh, 46vh, 0vh)

I am finding that my css styles are not applying, or frustratingly will apply seemingly at random and other times not apply even though the underlying code remains the same. I tried to override, or at least alter, the position absolute styles of the canvas, by wrapping it in a parent element with position relative, which works to keep the height and width of the chart as desired, but the aspect ratio seems to falter and the chart axes are blurred and illegible.

I’m sure this would be a great instance of a picture says a 1000 words, and I am nearing a 1000 words. Will try to attach a codepen/ example that demonstrates the issue I am experiencing.

If there are any tips or tricks you would recommend please advise

Hello,
I am trying to make an annotation draggable. I tried setting the isEditable property to true, but nothing happened. I can’t find the right documentation for draggable annotations . My code for creating the Annotation it’s below:

sciChartSurface.annotations.add(new LineAnnotation({
    stroke: "#279B27", strokeThickness: 3,
    xCoordinateMode: ECoordinateMode.DataValue,
    x1: 0,
    x2: 0,
    yCoordinateMode: ECoordinateMode.Relative,
    y1: 0,
    y2: 1,
    isEditable: true,
}));

I am getting a console error when using isVisible: false to the FastLineRenderableSeries or FastMountainRenderableSeries and CursorModifier together.

  const { wasmContext, sciChartSurface } = await SciChartSurface.create(
    "chart" + this.element
  );
  sciChartSurface.xAxes.add(
    new NumericAxis(wasmContext, { axisAlignment: EAxisAlignment.Top })
  );
  sciChartSurface.yAxes.add(
    new NumericAxis(wasmContext, {
      axisAlignment: EAxisAlignment.Left,
      growBy: new NumberRange(0.4, 0.4)
    })
  );

  const dataSeries = new XyDataSeries(wasmContext);
  const POINTS = 1000;
  const STEP = (3 * Math.PI) / POINTS;
  for (let i = 0; i <= 1000; i++) {
    const k = 1 - i / 2000;
    dataSeries.append(i, Math.sin(i * STEP) * k * 0.7);
  }

  const rendSeries = new FastLineRenderableSeries(wasmContext, {
    dataSeries: dataSeries,
    strokeThickness: 1,
    stroke: "red",
    isVisible: false
  });
  sciChartSurface.renderableSeries.add(rendSeries);
  // sciChartSurface.background = this.color;

  sciChartSurface.chartModifiers.add(
    new ZoomExtentsModifier(),
    new ZoomPanModifier(),
    new MouseWheelZoomModifier()
  );

  // Add CursorModifier behavior
  const cursorModifier = new CursorModifier({
    crosshairStroke: "#ff6600",
    crosshairStrokeThickness: 1,
    tooltipContainerBackground: "#000",
    tooltipTextStroke: "#ff6600",
    showTooltip: true,
    axisLabelsFill: "#b36200",
    axisLabelsStroke: "#fff"
  });
  sciChartSurface.chartModifiers.add(cursorModifier);

  sciChartSurface.zoomExtents();
  return { wasmContext, sciChartSurface };

Remove the white spaces on the chart when we using drawLabels: false. I am using multiple x-axes and no of x-axis increase the empty white space on the x-axis is also increasing.

I have a chart with default majorDelta 10 for y-axis. Users are allowed to change the scale (majorDelta) of the chart. When it’s changed to 0.1, the y-axis labels are gone. The y-axis labels can still be seen when the majorDelta is 0.2. Please check my screenshots for details.

I am considering applying server-side licensing for my javerScript application.

In the document below, there is a phrase “Our server-side licensing component is written in C++.”
(https://support.scichart.com/index.php?/Knowledgebase/Article/View/17256/42/)

However, there is only asp.net sample code on the provided github.
(https://github.com/ABTSoftware/SciChart.JS.Examples/tree/master/Sandbox/demo-dotnet-server-licensing)

I wonder if there is a sample code implemented in C++ for server-side licensing.

Can you provide c++ sample code?
Also, are there any examples to run on Ubuntu?

Do you have Fibonacci Arcs and Retracements in JavaScript charts? If yes could you please provide a sample to build them.

Hi,

Currently when we scroll the mouse pointer the zoom level is increasing/decreasing and when we click and drag the pan the chart. I want is when we scroll the chart should change the visible range (Pan chart), and clicking and selecting the area need to zoom like RubberBandXyZoomModifier. But I need to zoom only the X axis. Y axis should be the same as before zoom. Is this possible with SCI chart??

Multiple instances of sci chart any appearance changes reflecting on other instances. When I changed the background of one instance the same is reflected in the other instance. I have updated with createSingle to resolve this issue, But i am getting one alert when using createSingle.